API 682 Mechanical Seal Plan Selection Guide for Sulzer GSG Pumps

2026-03-15 11:23

API 682 Mechanical Seal Plan Selection Guide for Sulzer GSG Pumps

Sulzer GSG pumps are vertical barrel pumps fully compliant with API 610 (BB5) standards, engineered for high-pressure (P ≤ 150 bar) and high-head applications in power plants, petrochemical refineries, and heavy industry. Their vertical configuration results in seal chamber pressure exceeding suction pressure and presents inherent risks of air entrapment. Precise selection of API 682 seal plans (piping plans) is essential to ensure mechanical seal reliability, zero-leakage performance, and extended service life in critical processes such as boiler feedwater, hydrogenation, and high-pressure fluid transfer.

Core Selection Principles for Sulzer GSG Pumps

  • Vertical Structure Adaptation: The vertical barrel design requires plans with venting capabilities to prevent air entrapment and low-pressure side return (Plan 13).

  • Extreme Pressure/Temperature Conditions: For P > 100 bar, T ≤ 350°C, external pressurized barrier plans (Plan 54) with API 614-compliant lubrication systems are recommended.

  • High-Temperature Abrasive Media: For 80°C < T ≤ 177°C and solids-laden fluids, integrated particle separation and cooling plans (Plan 41) are required.

  • API 682 Compliance: All recommended plans adhere to API 682 4th Edition standards, ensuring compatibility with high-pressure industrial requirements.

  • Material Compatibility: Seal plans are paired with high-strength, corrosion-resistant materials (Inconel, Hastelloy, super duplex steel) for extreme operating conditions.

API 682 Seal Plan Recommendations for Sulzer GSG Pumps

API PlanApplication ScenariosConfiguration DetailsMaintenance Recommendations
Plan 13 (Standard for Vertical Pumps)- Clean, high-pressure media (boiler feedwater, demineralized water, clean hydraulic oil)
- T ≤ 120°C, P ≤ 40 bar
- Power generation, high-pressure water supply, clean fluid circulation
- Flow path: Seal chamber → Orifice plate (≥4 mm, 316L) → Pump suction
- Recommended seal: TS2/SE2 (single cartridge, balanced, vertical-optimized)
- Components: 316L orifice plate, top-mounted vent valve, pressure gauge, stainless steel piping
- Materials: SiC/TC faces, EPDM O-rings, 316L metal parts
- Open vent valve before startup until continuous fluid flow (prevents air entrapment)
- Maintain flush velocity ≥0.8 m/s
- Monitor ΔP across orifice (>5 bar indicates blockage)
- Inspect seal chamber annually for corrosion
- Replace O-rings every 18 months (EPDM for water, FKM for oil)
Plan 54 (External Pressurized Barrier)- Extreme pressure/high-temperature media (hydrogenation feedstock, hot oil, nuclear coolant)
- P > 100 bar, T ≤ 350°C
- Zero-leakage applications
- Hydrogenation units, nuclear power, supercritical processes
- External API 614 lube system → Pressurized barrier fluid → Seal chamber → Closed-loop return
- Recommended seal: SPG Bellows/TS3P (double metal bellows, high-pressure rated)
- Components: External pump, Inconel heat exchanger, pressure relief valve, flow switch
- Materials: SiC/SiC faces, Aflas/Kalrez O-rings, Inconel 718/Hastelloy metal parts
- Maintain barrier flow ≥5 L/min
- Keep barrier fluid ≤85°C
- Maintain barrier pressure 2-3 bar above process pressure
- Inspect metal bellows every 18 months
- Calibrate pressure relief valve annually
- Use Hastelloy piping for sour service
Plan 41 (High-Temp Abrasive Media)- Solids-laden, high-temperature fluids (catalytic slurry, coal tar, heavy oil)
- 80°C < T ≤ 177°C, P ≤ 60 bar
- Solids content ≤3%
- FCC units, coal liquefaction, slurry transfer
- Flow path: Discharge → Cyclone separator → Cooler → Seal chamber
- Recommended seal: SE2 (double, SiC/SiC faces)
- Components: Duplex cyclone, Inconel cooler, backflush valve, pressure gauge
- Materials: SiC/SiC faces, FKM O-rings, duplex steel metal parts
- Verify cyclone efficiency monthly (≥95% particle removal)
- Clean cooler quarterly
- Maintain seal chamber ≤90°C
- Inspect cyclone liner annually
- Use PTFE-lined piping for sticky fluids
- Check seal faces monthly (replace if scratches >0.1 mm)

Recommended Seal-Plan Combinations

ApplicationRecommended ConfigurationMaterial UpgradesExpected Life
Power plant boiler feedwater (110°C, 35 bar)Plan 13 + TS2SiC/TC faces, EPDM, 316L30,000+ hours
Hydrogenation unit transfer (320°C, 130 bar, zero-leakage)Plan 54 + SPG BellowsSiC/SiC faces, Aflas, Inconel 71820,000+ hours
Catalytic cracking slurry (150°C, 50 bar, 2% solids)Plan 41 + SE2SiC/SiC faces, FKM, Duplex16,000+ hours
High-pressure amine treating (200°C, 110 bar)Plan 54 + TS3PSiC/SiC faces, Kalrez, Hastelloy22,000+ hours

HYRIG Support for Sulzer GSG Pumps

HYRIG specializes in API 682-compliant seal support systems and replacement parts for Sulzer GSG vertical barrel pumps. Our product portfolio includes:

  • Seal Support System Components: Cyclone separators (duplex steel), API 614 external lubrication systems, Inconel-tubed heat exchangers, vent valves, pressure relief valves

  • Replacement Parts: Cartridge mechanical seals (TS2, TS3P, SPG Bellows, SE2), Aflas/Kalrez O-rings, duplex/super duplex components, orifice plates, flow switches

  • Custom Solutions: API 682 plan design optimized for vertical pumps, material selection for extreme conditions, on-site technical support, startup assistance

All HYRIG products are engineered to match Sulzer GSG pump specifications, comply with API 610 (BB5) and API 682 standards, and perform reliably in high-pressure, high-temperature, and abrasive industrial environments.

For custom plan design, technical consultation, or quotation requests, contact our team at info@hyrig.com.


More Mechanical Seals:

BBS 25-160 Cartridge Mechanical Seal API682 0400-25160 | Sulzer Pump Replacement Parts
BBS 80-315 Cartridge Mechanical Seal API682 0400-80315 | Complete Sulzer Pump Replacement Parts
Mechanical Seal VJ34-R for SB3×4J XBSY/ Chengdu Xibu /Chengdu WestPetro Sand Pump / Centrifugal pump
Mechanical Seal for Mission MAGNUM 4x3x13
BBS 150-400 Cartridge Mechanical Seal API682 0400-150400 | Complete Sulzer Pump Replacement Parts
Mechanical Seal W13110002 for SB5×6J XBSY/ Chengdu Xibu /Chengdu WestPetro Sand Pump / Centrifugal pump
Replacement Sulzer pump mechanical seal (single / double / cartridge / API 682)
High-Quality Mechanical Seal for Sulzer BBS Centrifugal Pump 12×16×27K | API 610 BB2 Process Pump Replacement Seal
BBS 40-200 Cartridge Mechanical Seal API682 0400-40200 | Complete Sulzer Pump Replacement Parts
Mechanical Seal VJ68-R for SB5×6J XBSY/ Chengdu Xibu /Chengdu WestPetro Sand Pump / Centrifugal pump

Name:
Message:
Verification code:
Submit
Comment