Sulzer ZE pumps are horizontal process pumps fully compliant with API 610 OH2 standards, specifically engineered for chemical processing, refining, seawater desalination, and industrial fluid transfer. These pumps excel at handling corrosive media, moderate abrasive fluids, and critical process liquids (P ≤ 80 bar, T ≤ 220°C), requiring precise API 682 seal plan (piping plan) matching to ensure mechanical seal reliability, corrosion resistance, and long service life in harsh operating environments.
Corrosion Resistance Priority: For corrosive media (acids, alkalis, seawater) → select plans with corrosion-resistant components such as PTFE-lined piping and titanium coolers.
Temperature Adaptation: For T ≤ 80°C (clean corrosive media) → use basic Plan 11; for 80°C < T ≤ 177°C (hot corrosive media) → employ cooled Plan 21.
Zero-Emission Demand: For toxic/flammable corrosive media → implement pressurized dual seal Plan 53A with PTFE-lined seal pots.
Abrasive/Polymerizing Media: For solids-laden or sticky fluids → apply external clean flush Plan 32 to prevent seal face fouling.
API 682 Compliance: All recommended plans adhere to API 682 4th Edition standards, ensuring compatibility with chemical and refining industry requirements.
| Aspect | Details |
|---|---|
| Application Scenarios | • Clean corrosive media (seawater, weak alkalis, dilute acids, mild solvents) • Operating conditions: T ≤ 80°C, P ≤ 25 bar • Typical industries: Seawater desalination, chemical processing, marine applications, water treatment |
| Configuration Details | • Flow path: Pump discharge → Teflon-lined orifice plate (≥3 mm) → Seal chamber (12 o’clock injection) • Recommended seal type: SZE/TS1/SE1 (single-ended, balanced, corrosion-resistant; Sulzer OEM-compatible) • Key components: Teflon-lined orifice plate, 316L stainless steel piping, FKM/EPDM O-rings, pressure gauge • Material specifications: Seal faces (SiC/TC), O-rings (EPDM for seawater, FKM for weak acids/alkalis), metal parts (316L stainless steel) |
| Maintenance Tips | • Use EPDM O-rings for seawater (saltwater resistance) and FKM for weak corrosives • Replace Teflon-lined orifice plate annually • Maintain flush flow rate ≥1 m/s (orifice diameter ≥3 mm) • Flush piping with fresh water after shutdown for seawater applications • Inspect seal chamber quarterly for corrosion |
| Aspect | Details |
|---|---|
| Application Scenarios | • Hot corrosive media (hot dilute acids, high-temperature solvents, corrosive heat transfer fluids) • Operating conditions: 80°C < T ≤ 177°C, P ≤ 40 bar • Typical industries: Chemical refining, acid recovery, corrosive process heating, pharmaceutical manufacturing |
| Configuration Details | • Flow path: Pump discharge → Titanium-tubed cooler (cocurrent flow) → Teflon-lined orifice plate → Seal chamber • Recommended seal type: TS2/SE1F (single-ended with flushing, corrosion-resistant; Sulzer ZE dedicated) • Key components: Titanium-tubed cooler (acid-resistant), Teflon-lined piping, Kalrez O-rings, temperature sensor • Material specifications: Seal faces (SiC/SiC), O-rings (Kalrez for high-temperature corrosion resistance), metal parts (duplex steel) |
| Maintenance Tips | • Maintain cooler outlet temperature ≤80°C • Keep temperature difference ≤50°C across cooler (avoid thermal shock) • Inspect titanium cooler tubes every 6 months • Vent cooler at highest point before startup • Replace Kalrez O-rings every 18 months |
| Aspect | Details |
|---|---|
| Application Scenarios | • Toxic/flammable corrosive media (chlorine, toxic solvents, concentrated acids, hazardous chemical intermediates) • Operating conditions: P ≤ 60 bar, zero-emission/environmental compliance required • Typical industries: Chemical synthesis, hazardous waste treatment, pharmaceutical manufacturing, petrochemical processing |
| Configuration Details | • Fluid system: PTFE-lined seal pot (10–14 bar) + nitrogen blanket (prevents media oxidation) • Barrier fluid: Deionized water + corrosion inhibitor (compatible with process media) • Recommended seal type: TS2P/SE2 (double-ended, balanced, corrosion-resistant; Sulzer OEM-compatible) • Key components: PTFE-lined seal pot, pH sensor, level switch, pressure regulator, duplex steel piping • Material specifications: Seal faces (SiC/SiC), O-rings (Kalrez), metal parts (super duplex steel) |
| Maintenance Tips | • Monitor pH level of barrier fluid (maintain 7–9) • Keep nitrogen blanket pressure 1.75 bar above process pressure • Inspect PTFE lining quarterly • Analyze barrier fluid monthly for contamination • Clean seal pot annually |
| Aspect | Details |
|---|---|
| Application Scenarios | • Polymerizing media (polymer solutions, resins), moderate abrasive fluids (pulp slurry, sludge, sticky chemicals) • Operating conditions: T ≤ 120°C, P ≤ 25 bar, solids content ≤3% • Typical industries: Pulp and paper, wastewater treatment, chemical processing (polymer production), food processing |
| Configuration Details | • Fluid system: External clean fluid source (deionized water, clean solvent, or process-compatible fluid) → metering pump → seal chamber → drain • Recommended seal type: SE1C/SE2C (single/double-ended, abrasion-resistant; Sulzer ZE dedicated) • Key components: PTFE-lined piping (prevents adhesion), external fluid reservoir, flow meter (1–2 L/min), check valve • Material specifications: Seal faces (SiC/SiC), O-rings (FKM), metal parts (duplex steel) |
| Maintenance Tips | • Adjust external flush rate to 1–2 L/min • Ensure external fluid compatibility with process media • Clean external fluid reservoir monthly • Inspect seal faces weekly for polymer buildup • Replace PTFE-lined piping every 24 months |
| Application Type | API Plan + Seal Model | Key Material Upgrades | Expected Operating Life |
|---|---|---|---|
| Seawater desalination (T=60°C, P=20 bar) | Plan 11 + SZE | SiC/TC faces; EPDM O-rings; 316L metal | 22,000+ hours |
| Hot acid recovery (T=150°C, P=35 bar, 5% dilute sulfuric acid) | Plan 21 + TS2 | SiC/SiC faces; Kalrez O-rings; duplex steel metal | 18,000+ hours |
| Toxic solvent transfer (chlorinated solvent, T=90°C, P=45 bar, zero-emission) | Plan 53A + TS2P | SiC/SiC faces; Kalrez O-rings; super duplex steel metal | 20,000+ hours |
| Pulp slurry handling (T=100°C, P=22 bar, 2% solids) | Plan 32 + SE2C | SiC/SiC faces; FKM O-rings; duplex steel metal | 15,000+ hours |
HYRIG specializes in providing API 682-compliant seal support systems and replacement parts tailored for Sulzer ZE pumps. Our product range includes:
Seal Support System Components: Titanium-tubed coolers, PTFE-lined orifice plates and piping, PTFE-lined seal pots, flow meters, check valves
Replacement Parts: Cartridge mechanical seals (SZE/TS1/TS2/TS2P/SE1/SE2), Kalrez/FKM/EPDM O-rings, duplex and super duplex steel components, orifice plates
Custom Solutions: API 682 plan design (optimized for corrosion/abrasion), material selection for extreme media, on-site technical support, startup assistance
All HYRIG products are engineered to match Sulzer ZE pump specifications, meet API 610 and API 682 standards, and withstand corrosive and abrasive industrial conditions.
For customized plan design, technical consultation, or quotation requests, contact our expert team at info@hyrig.com.
More Mechanical Seals:
Sulzer Cartridge Seals | TS Series Mechanical Seals for Reliable Operation and Easy Maintenance
BBS 65-315 Cartridge Mechanical Seal API682 0400-65315 | Complete Sulzer Pump Replacement Parts
BBS 80-250 Cartridge Mechanical Seal API682 0400-80250 | Complete Sulzer Pump Replacement Parts
Mechanical Seal SB23J0044 for SB2×3J XBSY/ Chengdu Xibu /Chengdu WestPetro Sand Pump / Centrifugal pump
Mechanical Seal for Mission MAGNUM Centrifugal pump 10x8x14
Mechanical Seal for Sulzer BBS 12×14×24 | API 610 BB2 Boiler Feed Water Boosting Pump Replacement Seal
Sulzer Mechanical Seal for ZE Pump: Elevate Reliability with API 610-Certified Wearing Parts
BBS 40-250 Cartridge Mechanical Seal API682 0400-40250 | Complete Sulzer Pump Replacement Parts
Mechanical Seal for Mission MAGNUM 3x2x13