Sulzer Mechanical Seal: Comprehensive Guide for Pump Compatibility, Applications & Replacements

2026-03-15 08:43

Sulzer Mechanical Seal: Comprehensive Guide for Pump Compatibility, Applications & Replacements

HYRIG specializes in providing Sulzer alternative pumps and high-quality replacement wear parts that fully comply with API 610 standards. We offer reliable solutions for Sulzer pump series including API 610 Centrifugal Pumps, BSS, OHH, GSG, ZE and more. Our product range covers all critical Sulzer mechanical seals and essential wear components, engineered to ensure seamless compatibility, extended service life, and cost-effective operation. For inquiries, please contact us at info@hyrig.com.

I. Core Sulzer Mechanical Seal Series: Types & Specifications

Sulzer mechanical seals are categorized into four primary series—Ready-fitted Seals (TB Series), Cartridge Seals (TS Series), Element Seals (ES Series), and Safematic OEM Seals (SE Series)—along with high-temperature/high-pressure dedicated models. Each series is designed to meet diverse industrial demands, from general-purpose to extreme operating conditions.

1. Ready-fitted Seals (TB Series)

Pre-assembled for easy installation without extra shaft sleeves, ideal for direct packing gland replacement.

Model

Structure

Compatible Pumps

Applications

Core Materials

Operating Parameters

TB1

Single-ended, Balanced, O-ring Actuated

AHLSTAR (A/APP/NPP/WPP), BSS

Clean water, oils, weak corrosives, non-abrasive media; general processes

Seal Faces: SiC/Carbon/TC; Metal: 316L/Duplex Steel; O-rings: EPDM/FKM

P≤25bar, V≤25m/s, T≤125℃

TB1G

Single-ended, Grease-lubricated

AHLSTAR, BSS

Low-speed, light-load applications without flushing conditions

Same as TB1

P≤25bar, V≤25m/s, T≤125℃

TB1F

Single-ended, Built-in Flushing

AHLSTAR, BSS

Crystallizing media, low-solids fluids, applications requiring cooling

Same as TB1

T≤140℃ (with flushing)

TB1Q

Single-ended, Quench Protection

AHLSTAR, BSS

Toxic, volatile media needing external seal protection

Same as TB1

P≤25bar, T≤125℃

TB1FQ

Single-ended, Flushing + Quench

AHLSTAR, BSS

High-hazard media, zero-leakage requirements

Same as TB1

T≤140℃ (with flushing)

TB2P

Double-ended, Balanced, Cartridge-style

AHLSTAR, BSS

High-temperature, high-pressure, abrasive, toxic media; zero-leakage demands

Seal Faces: SiC/SiC; Metal: Super Duplex Steel; O-rings: PTFE/Kalrez

T≤180℃ (with flushing)

2. Cartridge Seals (TS Series)

Universal pre-assembled units with high installation accuracy, no on-site alignment required.

Model

Structure

Compatible Pumps

Applications

Core Materials

Operating Parameters

TS1

Single-ended, Balanced, Cartridge

AHLSTAR, ZE/ZF, Scanpump, BSS, OHH, GSG

General processes, clean media

Seal Faces: SiC/TC; Metal: 316L; O-rings: EPDM

P≤40bar, T≤180℃

TS2

Single-ended, Multi-spring, Balanced

AHLSTAR, ZE, BSS, OHH, GSG

Medium-high pressure, low-solids media

Seal Faces: SiC/SiC; Metal: Duplex Steel

P≤60bar, V≤25m/s

TS2P

Double-ended, Cartridge, Circulation-ready

ZE, OHH, GSG, BSS

High-hazard, high-temperature/pressure media; zero-leakage

Seal Faces: SiC/SiC; Metal: Super Duplex Steel; O-rings: Kalrez

P≤80bar, T≤220℃

TS3P

Double-ended, High-pressure Cartridge

GSG

Hydrogenation, high-pressure amine, 渣油 applications

Seal Faces: SiC/SiC/TC; Metal: Hastelloy/Super Duplex Steel

P≤120bar, T≤250℃

3. Element Seals (ES Series)

Integral design optimized for seal chamber space, no additional components needed.

• Structure: Single-ended, balanced element seal

• Compatible Pumps: AHLSTAR (A/APP/NPP/WPP)

• Applications: Standard processes, clean/weak corrosive media

• Materials: Seal Faces (SiC/Carbon), Metal (316L), O-rings (EPDM/FKM)

• Parameters: P≤25bar, V≤25m/s, T≤125℃

4. Safematic OEM Seals (SE Series)

Custom-engineered by John Crane for Sulzer pumps, ideal for pulp, chemical, and harsh industrial environments.

Model

Structure

Compatible Pumps

Applications

Core Materials

SE1

Single-ended, Balanced, Cartridge

APP/APT, Scanpump, BSS, OHH, ZE

Water, oils, solvents, pulp (≤2% solids)

Seal Faces: SiC/Carbon; O-rings: EPDM/PTFE; Metal: 316L

SE1C

Single-ended, Cartridge

Scanpump

Pulp and paper processes

Same as SE1

SE1F

Single-ended, Flushing-equipped

Scanpump, ZE

Crystallizing media, high-temperature applications

Same as SE1

SE2

Double-ended, Balanced, Cartridge

APP, Scanpump, OHH, GSG, ZE

Pulp cooking, evaporation, caustic media, abrasive/toxic fluids

Seal Faces: SiC/SiC (media side), SiC/Carbon (atmosphere side); O-rings: PTFE/FKM; Metal: Duplex Steel/Titanium

SE2-APR

Double-ended, Circulation-ready

APP, GSG

High-pressure, high-hazard media; zero-leakage

Same as SE2

5. High-Temperature/High-Pressure Seals (SPG Bellows Series)

• Structure: Single/double-ended, metal bellows design

• Compatible Pumps: CP/CH/CE, OHH, GSG

• Applications: Residual oil hydrogenation, high-temperature heat transfer fluids, nuclear power, superheated media

• Materials: Seal Faces (SiC/SiC, WC/TC); Metal (Inconel/Hastelloy); O-rings (Aflas/Kalrez)

• Parameters: P≤60bar, T≤350℃, V≤20m/s

II. Sulzer Pump Series & Recommended Mechanical Seals

Sulzer Pump Series

Recommended Seals

Typical Applications

AHLSTAR (A/APP/NPP/WPP)

TB1/TB1F/TB2P, ES, SE1/SE2

Chemical processing, papermaking, water treatment, general industrial processes

BSS (API 610 OH1/OH2)

TB1/TB2P, TS1/TS2P, SE1/SE2

Chemicals, general processes, medium-pressure applications

OHH (API 610 OH2)

TS1/TS2P, SE1/SE2, SPG Bellows

Refining, petrochemicals, heavy-duty industrial processes

GSG (API 610 BB5)

TS2P/TS3P, SE2-APR, SPG Bellows

High-pressure water injection, hydrogenation, hydraulic turbines

ZE (API 610 OH2)

TS1/TS2P, SE1/SE2, SZE Series

Chemical processing, refining, seawater desalination

Scanpump

SE1C/SE2C, TB Series

Pulp, paper, slurry handling

CP/CH/CE (High-Pressure)

SPG Bellows, Double-ended Bellows Seals

Residual oil, high-temperature heat transfer fluids, nuclear power

III. Material Selection for Sulzer Mechanical Seals

Medium/Operating Condition

Seal Faces

Secondary Seals (O-rings)

Metal Components

Clean Water/Oils/Weak Corrosives

SiC/Carbon, TC/Carbon

EPDM, NBR, FKM

316L Stainless Steel

Strong Acids/Alkalis/Halogens

SiC/SiC, WC/TC

PTFE, Kalrez, Aflas

Titanium, Hastelloy, Super Duplex Steel

Abrasive/Solid-laden Media

SiC/SiC, WC/TC

FKM, PTFE

Duplex Steel, Super Duplex Steel

High-Temperature (>180℃)

SiC/SiC, TC/TC

Aflas, Kalrez

Inconel, Hastelloy

High-Pressure (>60bar)

SiC/SiC, TC/TC

Kalrez, FFKM

Super Duplex Steel, Titanium

IV. HYRIG Replacement Wear Parts for Sulzer Pumps

HYRIG supplies premium replacement wear parts engineered to match Sulzer’s original specifications, ensuring optimal performance and durability. Below is the list of common wear parts, materials, and replacement recommendations:

Wear Part

Material Options

Replacement Recommendations

Cartridge Mechanical Seal

SiC/SiC, WC/TC, 316L/Duplex Steel, Kalrez O-rings

Replace every 12–24 months (or when leakage exceeds 5ml/min); inspect seal faces for wear/cracks

O-ring Set for Seal

EPDM, FKM, PTFE, Kalrez, Aflas

Replace annually or during seal maintenance; choose material based on medium compatibility

Double Suction Impeller

Chrome Steel, 316L Stainless Steel, Duplex/Super Duplex Steel

Replace when erosion/corrosion exceeds 10% of blade thickness; check for imbalance

Impeller Wear Ring

Chrome Steel, 316L, Duplex Steel

Replace when clearance exceeds 0.5mm (or 2x original clearance)

Casing Wear Ring

Chrome Steel, 316L, Duplex/Super Duplex Steel

Replace with impeller wear ring for optimal efficiency

Shaft Sleeve (Seal Side)

316L, Duplex Steel, Titanium

Replace if surface roughness >Ra 0.8μm or signs of corrosion/scratches

Shaft Sleeve (Bearing Side)

316L, Chrome-plated Steel

Replace when wear affects bearing fit or alignment

Angular Contact Bearing SET

Chrome Steel, Ceramic Hybrid

Replace every 24–36 months; lubricate regularly with compatible grease/oil

Oil Seal

Nitrile Rubber, FKM, PTFE

Replace during bearing maintenance or if oil leakage is detected

Casing Gasket

PTFE, Graphite, FKM-coated

Replace every time the pump casing is opened; ensure proper torque during installation

Full Maintenance Kit

Assorted OEM-compatible Parts

Use for scheduled overhauls (every 24–36 months) to minimize downtime

Wear Parts Kit

Customized Assortment

Tailored to specific pump models; ideal for critical process lines

V. Key Selection Principles for Sulzer Mechanical Seals

1. Single-ended Seals (TB1, TS1, SE1): Suitable for clean, non-toxic, non-abrasive media with P≤25bar and T≤125℃.

2. Double-ended Seals (TB2P, TS2P, SE2): Required for toxic, flammable, crystallizing, abrasive media or zero-leakage demands.

3. Flushing/Quench Features (TB1F, TB1Q, SE1F): Essential for high-temperature, crystallizing, or high-hazard media to prevent seal damage.

4. API 682 Compliance: All TS/SE/SPG series meet API 682 standards, with recommended flushing plans (Plan 11 for clean media, Plan 21 for high-temperature, Plan 53A/B for double-ended seals) .

HYRIG’s Sulzer alternative mechanical seals and wear parts are rigorously tested to ensure compatibility with API 610 centrifugal pumps and all Sulzer pump series. For quotation requests, contact info@hyrig.com today.


More Mechanical Seals:

BBS 25-200 Cartridge Mechanical Seal API682 | Sulzer Pump Mechanical Seal Replacement
Mechanical Seal VJ68-Lfor SB6×8J XBSY/ Chengdu Xibu /Chengdu WestPetro Sand Pump / Centrifugal pump
Mission Magnum Pump 640202222IT50,4X3X13 Mechanical Seal
Mechanical Seal for Mission MAGNUM 6x5x14
Mechanical Seal W13110004 for SB2×3J XBSY/ Chengdu Xibu /Chengdu WestPetro Sand Pump / Centrifugal pump
W13110003 Mechanical Seal for SB6*8 XBSY / Chengdu Xibu / Chengdu WestPetro Centrifugal Sand Pump
Sulzer Element Seals | ES Balanced Single Mechanical Seals for AHLSTAR Pumps

Name:
Message:
Verification code:
Submit
Comment