Sulzer ZPP Cooling Water Pump – API 610 BB1 Axially Split Pump

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Sulzer ZPP horizontal axially split single-stage centrifugal pump meeting API 610 BB1 (ISO 13709) standards. Double suction impeller provides low NPSH and axial thrust balance. Flow to 25,000 m³/h, head to 160 m, temperature to 120°C. Suitable for cooling tower circulation, condenser cooling, and process water. Available in carbon steel, stainless steel, and duplex.

Conatct For Details
DetailReview(0)Additional

The Sulzer ZPP is a heavy‑duty, double‑suction, axially split, single‑stage centrifugal pump designed for high‑flow, low‑ to medium‑head services such as large‑scale cooling water circulation. It fully complies with API 610 (BB1) and ISO 13709 standards, ensuring reliable, continuous operation in power plants, refineries, petrochemical complexes, and industrial cooling systems.

The pump features a horizontally split casing that allows full access to internal components by lifting the top half – no need to disconnect piping or move the driver, significantly reducing maintenance downtime.

Applications include:

  • Cooling tower main circulation pumps (CWP)

  • Condenser cooling water supply

  • Heat exchanger cooling loops

  • Industrial process water circulation

  • District cooling systems

Product Parameters

  • Flow rate: Up to 25,000 m³/h (110,000 US gpm)

  • Total head: Up to 160 m (525 ft)

  • Operating temperature: Up to 120°C (higher on request)

  • Design pressure: Up to 20 bar (290 psi)

  • Discharge sizes: 250 mm to 900 mm (10 to 36 inches)

  • Flange rating: ASME Class 150 or 300

  • Speed: Typically 750, 1,000, or 1,200 rpm (direct drive), but can be up to 3,000 rpm for smaller units

Design Features

  • Axially split casing: Horizontal split for easy maintenance – the upper half is removable without disturbing suction or discharge flanges.

  • Double suction impeller: Inherent axial thrust balance eliminates complicated balancing devices; provides excellent low NPSH performance, critical for cooling tower sump conditions.

  • Double volute casing (sizes ≥ DN250): Balances radial hydraulic forces, reducing shaft deflection and bearing loads, extending mechanical seal and bearing life.

  • Between‑bearings construction: Rigid shaft and two wide‑spaced bearings ensure smooth, vibration‑free operation across all flow conditions.

  • API 682 seal chamber: Accepts single, tandem (Plan 52), or double (Plan 53B) cartridge mechanical seals to meet environmental emission standards.

  • Renewable wear rings: Replaceable casing and impeller wear rings maintain hydraulic efficiency over the pump's lifetime.

Materials for Cooling Water Service

  • Standard (clean fresh water): Carbon steel (WCB) casing, carbon steel or 12% Cr impeller, AISI 4140 shaft, bronze wear rings.

  • Brackish or corrosive water: 304SS or 316L stainless steel for all wetted parts.

  • Sea water / high chloride: Duplex (2205) or super duplex (2507) stainless steel.

Seal & Flush Plans

  • Clean cooling water (<50°C): Single mechanical seal with Plan 11 (internal recirculation).

  • Warm cooling water (>60°C): Plan 21 or Plan 23 (cooled recirculation).

  • Zero-leak requirement (closed cooling loops): Tandem seal with Plan 52 or double seal with Plan 53B.

Lubrication

  • Oil ring self‑lubricating (standard for most cooling water duties).

  • Forced oil circulation (for high power or high speed applications).

  • Pure oil mist (optional).

Advantages for Cooling Water Systems

  • High efficiency: Low hydraulic losses reduce energy consumption over decades of operation.

  • Low NPSH requirement: Double suction impeller minimises cavitation risk, even with low submergence in cooling tower basins.

  • Quick maintenance: Axially split casing allows inspection or impeller replacement in a few hours without removing piping.

  • Long service life: Heavy‑duty construction meets API 610 requirements for 20+ years of continuous operation.

Sourcing & Support in China
We supply Sulzer ZPP pumps to power plants, refineries, and large industrial complexes throughout China. Our team provides pump selection assistance, complete documentation (performance curves, GA drawings, API datasheets, material certifications), and after‑sales support. Spare parts, including seals, bearings, and wear rings, are available through our local supply network.

For more information or a custom proposal for your cooling water pump (Sulzer ZPP) application, contact us at info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit