SWG31-105-2x2 Plug Valve | 2 in 15000 psi Valve
Overview:
HYRIG can supply the SWG31-105-2x2 plug valve and its repair kits. The SWG31-105-2x2 is a 2-inch plug valve with a working pressure of 105 MPa (15,000 psi), featuring FIG1502 connections for high-pressure flow control.
| Dimension Item | Specification |
|---|---|
| A | 353 mm |
| L | 88 mm |
| H | 225 mm |
The plug valve features a special coated plug for high wear and corrosion resistance. The body can be maintained online without removal, and the operation is flexible with low torque.
When replacing this valve, verify the end connections and pressure rating. The repair kit is interchangeable with standard products of the same specification.
Need a different size or pressure rating? Explore our complete Plug Valves Series.
Used in high-pressure manifolds to isolate flow. Suitable for standard environments.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply complete repair kits, including side segments, seals, and plugs.
Specifications:
FAQ:
Contact Us:
For SWG31-105-2x2 plug valve selection and repair kits, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.