Plug Valves Series | High Pressure Flow Control
Overview:
HYRIG can supply the complete plug valve series and their repair kits. These valves are designed for high-pressure flowline systems, featuring working pressures from 42 MPa to 140 MPa and sizes from 1 inch to 3 inches.
The dimensions vary by model and size. The valve body is forged from high-strength alloy steel. Please contact us for detailed drawings.
The plug valve uses a cylindrical plug with a passageway to control flow. It features a special coating for excellent wear and corrosion resistance, low operating torque, and a limit mechanism for clear open/close indication.
Selecting the correct plug valve requires matching the pressure rating and pipe size.
Tell us your requirements, and our engineers will assist.
Used in high-pressure flowlines to isolate or control fluid flow during drilling, cementing, and fracturing operations.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply complete repair kits for all models, including side segments, seals, and plugs. Please visit our our flowline catalog page.
Specifications:
FAQ:
Contact Us:
For plug valve selection and repair kits, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.