SWG51-105-3-10 Swivel Joint | 3 in 15000 psi Long Radius
Overview:
HYRIG can supply the SWG51-105-3-10 swivel joint and its repair kits. The SWG51-105-3-10 is a 10-type long radius swivel joint, featuring a 3-inch size, a working pressure of 105 MPa (15,000 psi), and standard FIG1502 connections.
| Dimension Item | Specification |
|---|---|
| A | 368 mm |
| B | 368 mm |
| C | 416 mm |
| Weight | Contact us for details |
The long radius design provides a smooth passage to minimize fluid resistance. It features increased wall thickness at erosion-prone areas for extended service life. The swivel joint allows for 360-degree rotation under high pressure.
When replacing this swivel joint, verify the end connections (FIG1502) and the bore size. The repair kit is interchangeable with standard products of the same specification.
Need a different size or pressure rating? Explore our complete Swivel Joints Series.
Used in high-pressure manifolds to accommodate movement and reduce vibration. Suitable for standard environments.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply standard repair kits for this model, including O-rings, bearings, and packing.
Specifications:
FAQ:
Contact Us:
For SWG51-105-3-10 selection and repair kits, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.