Tail Gas Desorber Bottom Pump – 110.3m Head & 21.7 m³/h Flow | API 610 OH2 Pump

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The Tail Gas Desorber Bottom Pump (API 610 OH2) delivers 21.7 m³/h at 110.3m head for styrene desorber absorbent. Handles 920 kg/m³ density at 102.3°C with –0.02 MPaG suction / 0.98 MPaG discharge. NPSHa 3.3m supports challenging low‑suction, high‑temperature duty. Ideal for tail gas stripper or desorber bottom service. Hyrig provides drop‑in replacements for major brands – same performance, better cost, shorter delivery. Contact: info@hyrig.com
Conatct For Details
DetailReview(0)Additional
Tail Gas Desorber Bottom Pump – 110.3m Head & 21.7 m³/h Flow | API 610 OH2 Pump

Product Description

The Tail Gas Desorber Bottom Pump (also referred to as Tail Gas Stripper Bottom Pump or Off‑Gas Desorber Bottom Pump) is an API 610 OH2 single‑stage overhung centrifugal pump designed for low‑suction pressure, high‑head desorber bottom service in styrene monomer production units. It delivers a head of 110.3 meters at a flow rate of 21.7 m³/h, handling absorbent with a density of 920 kg/m³ at 102.3°C.

Key operating parameters:

  • Flow rate: 21.7 m³/h

  • Head: 110.3 m

  • Medium: Absorbent

  • Density: 920 kg/m³

  • Temperature: 102.3 °C (inlet/outlet)

  • Suction pressure: –0.02 MPa G (slight vacuum) / Discharge pressure: 0.98 MPa G

  • NPSHa (effective suction head): 3.3 m – challenging low‑NPSH condition

  • Pump type: API 610 OH2

Engineered for tail gas desorber (stripper) bottom drainage in styrene plants, this OH2 pump reliably handles low suction pressure (–0.02 MPa G) and limited NPSHa (3.3 m) at elevated temperature (102.3°C). The back pull‑out design enables easy maintenance without disturbing piping, making it ideal for continuous bottom pump duty on vent gas desorbers.

Model variants available:

  • TGD‑BP (Tail Gas Desorber – Bottom Pump, concise and clear, recommended)

  • TGS‑BP (if the project uses Stripper instead of Desorber)

  • TGD‑BTM‑P (BTM = Bottom, more explicit but slightly longer)

  • D‑BP (if desorber tower designation is D, adding tower prefix for clarity)

Hyrig specializes in supplying API 610 standard process centrifugal pumps (OH2, BB2, BB5, VS6). Our core strength lies in providing complete drop‑in replacements for world‑leading brands such as Sulzer, Flowserve, and ITT Goulds – including Sulzer (OHH, OHHL, BBS, CD, CP, GSG, SJD‑API), Flowserve (HPX, HDX, HED‑DS, CSB, HDB, HSB, VCP, VCT), and Goulds (3700, 3700 LFI, 3640, 3620, 7200CB, VICR, VIC) pumps. All replacements deliver identical performance, quality, and standard compliance, with better cost‑effectiveness and shorter delivery times, offering efficient and economical fluid handling solutions for industrial applications.

For inquiries, please contact us at: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit