The 114706-500 is a lower inner blowout preventer specifically matched to the TDS-10SA top drive. It provides a second barrier below the top drive to enhance well control safety.
Part Number: 114706-500
Working Pressure: 5,000 psi (34.5 MPa)
Test Pressure: 7,500 psi (51.7 MPa)
Bore: 3-1/4"
Material: 4130 alloy steel
Seals: NBR
Operation: Manual T-handle
Direct fit: TDS-10SA
Also compatible: TDS-4SA, TDS-8SA, TDS-11SA
Workover rigs
Light drilling operations
Non-sour service
Perform pressure test before each run
Inspect ball and seat for wear
Replace NBR seals per schedule
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.