The TEDA KT14000 (also referred to as KHT14000) is a heavy‑duty, open‑type hydraulic casing power tong specifically engineered for making up and breaking out large‑diameter casing connections in oilfield drilling, well servicing, and workover operations. The “14000” in the model number indicates its torque rating (approximately 70,000 N·m at low gear), positioning this tool in the high‑torque category for the largest casing sizes used in oil and gas wells.
The KT14000 is a key member of the KT series heavy‑duty casing power tongs, which also includes models such as KT7625, KT9625, KT13375, and KT20000. Fully hydraulic and powered by a high‑efficiency low‑speed high‑torque hydraulic motor, it provides the exceptional torque required for handling large casing strings, significantly reducing labor intensity, improving thread connection quality, and minimizing casing accidents caused by improper casing running operations.
Open‑Type Head with Integral Design – Allows quick and convenient entry and exit from the working position, with an integral tong head providing excellent strength and rigidity.
Four‑Gear Rotation – Four‑speed transmission system with a wide speed regulation range (from 4.5 to 41 RPM), allowing operators to select the optimal balance of torque and speed.
Double Swing Head Jaws – The main tong utilizes a swing‑type double jaw plate clamping mechanism with an inner‑curve cam roller climbing structure for bi‑directional gripping.
Hydraulic Back‑up Tong – Three‑jaw‑plate structure pushed by a hydraulic cylinder, automatically synchronizing with the main tong.
Brake Belt Assembly – Large braking torque with simple operation, convenient for repair and replacement.
Open Large Gear Supporting Structure – Enhances the hardness and rigidity of the open large gear.
High‑Strength Steel Plate Shell – Provides excellent overall hardness and durability.
Hydraulic Torque Indicator – Standard equipment with an installation interface for a torque turn instrument, facilitating computerized management and data recording.
Safety Door Hydraulic Safety Device – Enhances operator safety during operation.
Low Stress Components for C.R.A. Casing (Optional) – Available for corrosion‑resistant alloy casing applications.
| Parameter | Specification |
|---|---|
| Master Tong Range | 5‑1/2″ – 14″ (140 – 356 mm) |
| Backup Tong Range | 5‑1/2″ – 15‑1/2″ (140 – 394 mm) |
| Low Gear Torque | 70,000 N·m (50,000 ft·lbs) |
| High Gear Torque | 7,500 N·m (5,500 ft·lbs) |
| Low Gear Speed | 4.5 RPM |
| High Gear Speed | 41 RPM |
| Rated Operation Pressure | 17.2 MPa (2,500 psi) |
| Rated Flow | 150 L/min (40 GPM) |
| Combined Tong Weight | ~1,720 kg (3,780 lbs) |
| Combined Tong Dimensions | 1,620 × 972 × 1,900 mm |
The TEDA KT14000 is the ideal choice for large‑diameter surface casing running, deep well workover rigs, and offshore drilling platforms handling casing up to 14″ OD, where maximum torque, operator efficiency, and casing protection are critical. Its four‑gear transmission system provides extensive speed regulation and high torque output, enabling operators to optimize cycle time while maintaining precise torque control under heavy loads.
Hyrig supplies all TEDA tongs and genuine spares. For inquiries, pricing, or technical support, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.