Complete Technical Overview
The TEDA KT24500 is a high‑capacity hydraulic casing tong designed for the most demanding large‑diameter casing operations in oil and gas fields. Built to API 7K standards, it is engineered to efficiently make up and break out casing strings during drilling, completion, and workover operations, dramatically reducing manual labor while enhancing thread connection quality and reducing well accidents.
This open‑type power tong features a two‑speed rotation system, providing optimal performance across a wide range of casing sizes and operational demands. Its massive 24-1/2″ master tong opening makes it ideal for large casing strings used in deep, high‑pressure wells.
Key Specifications
Model: KT24500
Application: Making up and breaking out casing in oil and gas fields
Master Tong Range: 9-5/8″ – 24-1/2″ (245 – 622 mm)
Low Gear Rated Torque: 70,000 N·m (50,000 ft·lbs)
High Gear Rated Torque: 12,000 N·m (8,800 ft·lbs)
Low Gear Rated Speed: 5.5 RPM
High Gear Rated Speed: 30 RPM
Rated Operation Pressure: 16 MPa (2,320 psi)
Rated Flow: 187.5 L/min (50 GPM)
Master Tong Dimensions (L×W×H): 2,120 × 1,350 × 800 mm (83.5″ × 53.2″ × 31.5″)
Master Tong Weight: 1,800 kg (3,970 lbs)
Key Features
API 7K Compliant: Manufactured to meet stringent API specifications, ensuring reliability and safety in critical well operations.
Two-Speed Gearbox: Delivers 70,000 N·m low gear torque at 5.5 RPM for heavy casing breakout and 12,000 N·m high gear torque at 30 RPM for efficient casing running.
Open-Type Tong Head: Convenient and prompt to enter and slide off the working position, with an integral tong head of great strength and rigidity.
Double Swing Head Jaws: Convenient to assemble and disassemble for quick jaw changes when handling different casing sizes.
Brake Belt Assembly: Easy to operate and convenient to maintain and replace.
Open Gear Supporting Structure: Improves gear strength and rigidity for extended service life under heavy loads.
Durable Construction: High‑strength steel plate used on the shell for increased durability; jaws are cast with precise technology for strength and reliability.
Hydraulic Torque Indicator: Standard equipment with installation interface for optional computerized torque control systems to precisely manage and record connection makeup torque.
Safety Door Hydraulic Safety Device: Provides enhanced operational safety on the rig floor.
Low Stress Components (Optional): Available for corrosion‑resistant alloy (CRA) casing applications to prevent galling and ensure thread integrity.
Frequently Asked Questions
Q: What is the maximum torque of the TEDA KT24500 hydraulic casing tong?
A: Low gear rated torque is 70,000 N·m (50,000 ft·lbs) at 5.5 RPM. High gear rated torque is 12,000 N·m (8,800 ft·lbs) at 30 RPM. High gear speed provides efficient casing running while low gear delivers the high torque required for making up and breaking out large casing connections.
Q: Which casing sizes does the KT24500 cover?
A: The master tong handles casing sizes from 9-5/8″ up to 24-1/2″ OD (245–622 mm). This includes common large casing sizes such as 9-5/8″, 10-3/4″, 11-3/4″, 13-3/8″, 16″, 18-5/8″, 20″, and 24-1/2″. The backup range covers similar diameters up to 24-1/2″.
Q: Is the KT24500 suitable for offshore operations?
A: Yes. The KT24500 is designed for both onshore and offshore operations, handling the large casing strings typically used in deepwater and high‑pressure wells. Optional corrosion‑resistant coatings are available for marine environments.
Q: What hydraulic power unit is required?
A: The tong requires a hydraulic power unit delivering 187.5 L/min flow at 16 MPa (2,320 psi). This is typically available on large drilling rigs, heavy workover units, and offshore platforms.
Q: How does the KT24500 compare to the smaller KT14000 model?
A: The KT24500 has a larger master tong opening (24-1/2″ vs 14″), handles larger casing diameters, and has identical low‑gear torque (70,000 N·m). However, the KT24500 drives larger casing sizes with the same torque capacity, making it the appropriate choice for 13-3/8″ to 24-1/2″ casing strings.
Complete Product Introduction for engineers & procurement
The TEDA KT24500 hydraulic casing tong is the flagship large‑diameter model in the TEDA KT series, designed for the most demanding surface casing, intermediate casing, and conductor pipe applications. It is deployed on offshore platforms, deepwater drilling rigs, heavy workover units, and large land rigs worldwide where large‑diameter casing strings up to 24-1/2″ OD must be safely and efficiently handled.
The two‑speed gearbox is engineered for maximum reliability under extreme loads. Low gear operation at 5.5 RPM provides controlled, high‑torque output of 70,000 N·m for breaking out stuck, corroded, or over‑torqued large casing connections. High gear at 30 RPM delivers 12,000 N·m of torque for efficient running of long casing strings when lower torque is sufficient. The open tong head design with 622 mm opening enables rapid positioning around the largest casing strings, critical for efficient casing running operations.
The open‑type design features an integral tong head of great strength and a brake belt assembly that is easy to operate and convenient to maintain and replace. The open gear supporting structure improves gear strength and rigidity for extended service life under heavy loads. Double swing head jaws are convenient to assemble and disassemble for quick size changes.
Standard safety equipment includes the hydraulic torque indicator and an optional interface for torque control systems, enabling computerized torque management for critical large‑diameter connections. The safety door hydraulic safety device stops operation when the door is opened, protecting the crew. Low stress components for CRA casing require optional upgrade.
The KT24500 is fully compatible with torque‑turn systems and remote control handles. Optional equipment includes a torque control system for precise torque measurement, display, recording, and closed‑loop control – critical for premium large‑diameter connections used in deep wells. CRA‑compatible low stress components are available for corrosion‑resistant alloy applications to prevent galling and ensure thread integrity.
Every unit is hydrostatically pressure‑tested and functionally tested before shipment to ensure reliability in the field.
For detailed 2D/3D drawings, operation manual (PDF), spare parts list, or a quotation tailored to your rig’s hydraulic system, please contact us:
Email: info@hyrig.com
We reply within 24 hours with technical datasheets and best pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.