TEDA KT7625 Hydraulic Casing Tong – API 7K Power Tong for Tubing & Small Casing

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The TEDA KT7625 hydraulic casing tong is an API 7K certified open‑type power tong for making up and breaking out tubing, drilling rod joints, and small casing during workover and well servicing operations. Features a two‑speed gearbox: low gear torque 21,000 N·m (15,490 ft·lbs), high gear torque 3,900 N·m (2,880 ft·lbs). Master tong range 2-3/8″–7-5/8″ (60–194 mm), backup range 2-3/8″–8-5/8″ (60–220 mm). Includes interlocking safety door and hydraulic torque indicator. Weight 760 kg, rated pressure 14 MPa, flow 14 L/min. Suitable for onshore and offshore oilfield applications.

Conatct For Details
DetailReview(0)Additional

Complete Technical Overview

The TEDA KT7625 is an API 7K certified open‑type hydraulic power tong specifically designed for making up and breaking out tubing, drilling rod joints, and small casing during oilfield workover, well servicing, and drilling operations. It is a improved product developed from the KT9625 model, offering reliable performance for a wide range of tubular applications. The tong features a two‑speed gearbox that allows operators to select between high speed for running and low speed for high‑torque operations.

Key Specifications

  • Master Tong Range: 2-3/8″ – 7-5/8″ (60 – 194 mm)

  • Backup Tong Range: 2-3/8″ – 8-5/8″ (60 – 220 mm)

  • Low Gear Rated Torque: 21,000 N·m (15,490 ft·lbs) @ 14 MPa

  • High Gear Rated Torque: 3,900 N·m (2,880 ft·lbs) @ 14 MPa

  • Low Gear Rated Speed: 11 RPM

  • High Gear Rated Speed: 60 RPM

  • Rated System Pressure: 14 MPa (2,030 psi)

  • Max. Flow: 14 L/min (3.7 GPM)

  • Tong Head Opening: Opening type with integral tong head

  • Weight (including backup tong): 760 kg (1,675 lbs)

  • Dimensions (L×W×H): 1,500 × 700 × 1,550 mm (59″ × 27.6″ × 61″)

*Note: The lower max. flow specification (14 L/min) may be an error in the source data. Flow requirements for a 21 kN·m power tong are typically in the 80–160 L/min range. Please verify with the manufacturer before finalizing your hydraulic power unit selection.*

Key Features

  • Two‑speed gearbox – provides high gear (60 RPM) for efficient running of tubing and low gear (11 RPM) for maximum torque output (21 kN·m) required for casing make‑up and break‑out.

  • Inner cam roller climbing mechanism – negative camber rollers inside the master tong ensure consistent clamping force across the entire pipe range, eliminating the need for part changes when switching pipe sizes.

  • Double swing head jaws – convenient to assemble and disassemble, with an optimal cutting diameter design for reliable clamping and easy back climbing.

  • Interlocking safety door – open‑type design allows quick entry to and retreat from the working position, with the tong head of great strength and rigidity.

  • Hydraulic torque indicator – standard equipment; also includes an installation interface for connecting to torque control and recording systems for computerized torque management.

  • API 7K compliant – meets international drilling and workover equipment standards.

  • Brake belt assembly – easy to operate and convenient to maintain and replace.

  • Open gear supporting structure – improves gear hardness and rigidity for longer service life.

  • High‑strength steel plate construction – the shell is made of alloy structural steel, increasing overall strength and durability. The jaws are cast with precise technology.

  • Optional torque control system – can be equipped to indicate, record, and control make‑up torque for premium connections.

Frequently Asked Questions

Q: What is the maximum torque of the TEDA KT7625 hydraulic casing tong?
A: Low gear rated torque is 21,000 N·m (15,490 ft·lbs) at 14 MPa system pressure. High gear rated torque is 3,900 N·m (2,880 ft·lbs). Some sources may show different torque values (e.g., 34 kN·m low gear, 7 kN·m high gear) due to variations in gear ratio configurations or manufacturer updates. The API 7K KHT7625 model is also available with 34,000 N·m low gear torque. Please confirm torque specifications with the manufacturer for your specific requirement.

Q: Which pipe sizes does the KT7625 cover?
A: The master tong handles 2-3/8″, 2-7/8″, 3-1/2″, 4″, 4-1/2″, 5″, 5-1/2″, 6-5/8″, 7″, and 7-5/8″ OD tubing and small casing (60–194 mm). The backup tong extends up to 8-5/8″ OD (220 mm), providing versatile coverage for most workover casing operations.

Q: What hydraulic power unit is required?
A: The KT7625 is rated for 14 MPa (2,030 psi) system pressure. Flow rate is indicated as 14 L/min, which appears unusually low for a 21 kN·m torque tong. Based on power tong design principles, the actual flow requirement for 21 kN·m at 11 RPM is likely in the 80–160 L/min range. Please verify with the manufacturer before connecting to your hydraulic system.

Q: Is this tong suitable for offshore operations?
A: Yes. The KT7625 is suitable for both onshore and offshore operations. Corrosion‑resistant coatings and marine-grade seals are available upon request.

Q: What is the difference between KT7625 and KHT7625?
A: The KT7625 and KHT7625 refer to the same or similar power tong model. The “KHT” prefix is commonly used in API 7K certified versions. The KT7625 described here is an improved product based on the KT9625. The KHT7625/35 variant offers 34 kN·m low gear torque. Please confirm which variant you require with the manufacturer.

Complete Product Introduction for engineers & procurement

The TEDA KT7625 hydraulic casing tong is an open‑type power tong widely used in oilfields for tubing, drilling rod joint, and small casing applications. Its two‑speed planetary gearbox design provides operational flexibility: high gear at 60 RPM allows efficient running of tubing strings, while low gear at 11 RPM delivers 21,000 N·m of torque for reliable casing make‑up and break‑out. The application range for oil tube, drilling rod joint, and small casing pipe is 60–194 mm (2-3/8″ to 7-5/8″).

The inner cam roller climbing mechanism is a key feature that distinguishes the KT series. Negative camber rollers inside the master tong climb and clamp, providing consistent clamping force across all pipe sizes in the range. This means no part changes are required when transitioning between different tubing or casing diameters, saving significant time during workover operations.

The double swing head jaw design ensures convenient assembly and disassembly, with an optimal cutting diameter that guarantees reliable clamping and easy back climbing. The open‑type tong head allows rapid positioning around the pipe string, while the integral tong head provides excellent strength and rigidity for demanding field conditions.

Standard safety features include an interlocking door system. A hydraulic torque indicator is provided, and an optional torque control system can be integrated for precise torque measurement, display, recording, and control – essential for premium connections. The brake belt assembly delivers large braking torque with simple operation, and is easy to maintain and replace. The open large gear supporting structure significantly enhances gear hardness and rigidity for extended service life.

The KT7625 is fully compatible with torque‑turn systems and remote control handles. Lengthening guide pole assemblies are available as options, allowing the backup tong to securely clamp the tubing for extended reach operations. Every unit should be pressure‑tested before shipment.

For detailed 2D/3D drawings, operation manual (PDF), spare parts list, or a quotation tailored to your rig’s hydraulic system, please contact us:

Email: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit