The Teda TQ340-35A is a heavy‑duty, open‑type hydraulic power tong specifically engineered for making and breaking large‑diameter casing connections in deep drilling, heavy workover, and offshore casing running operations. The “340” indicates a maximum gripping diameter of 340 mm (approx. 13.4 inches) , while the “35A” represents its maximum torque rating of 35 kN·m (approx. 310,000 in·lb) , with the “A” denoting an advanced design or improved jaw system for enhanced performance and durability. This tong is designed for the most demanding casing sizes, typically ranging from 9‑5/8″ up to 13‑3/8″.
This power tong is driven by a low‑speed, high‑torque hydraulic motor directly coupled with a heavy‑duty manual directional valve, ensuring robust, compact, and field‑reliable performance. The unit is supplied as a combination of a main tong and a hydraulic back‑up tong. By operating the directional valve on the main tong, the back‑up tong automatically clamps and releases the casing coupling in perfect synchronization – eliminating the need for separate controls and significantly enhancing operator safety.
Both the main tong and the back‑up tong feature an inner‑curve cam roller climbing mechanism with a multiple‑jaw design for bi‑directional gripping. To reverse the rotation direction, the operator simply turns the direction knob on both tongs. Interchangeable snap‑in dies allow the same tong to handle a wide range of casing sizes, typically from 9‑5/8″ to 13‑3/8″ , and optional dies can extend the range to 16″ or more.
The TQ340-35A offers two mechanical speed ranges: low gear delivers the full 35 kN·m torque for initial breakout or final make‑up on heavy casing connections, while high gear enables faster spinning to run casing in or out efficiently. This two‑speed design optimizes cycle time while maintaining precise torque control under extreme conditions.
Key features include:
High torque capacity (35 kN·m) – suitable for large intermediate and surface casing
Large gripping range up to 340 mm (13.4″) – handles common casing sizes 9‑5/8″ to 13‑3/8″
Automatic hydraulic back‑up tong – sync clamping and releasing, no foot valve
Bi‑directional gripping – quick direction change via rotation knob
Tool‑less die change – snap‑in dies for different casing sizes
Two‑speed transmission – balance of heavy breakout and fast spinning
Advanced “A” design – improved jaw geometry and wear resistance
Rugged, extreme‑duty construction – designed for deep wells, offshore platforms, and heavy casing jobs
API compliant – meets API Spec 7K / 8C standards
The Teda TQ340-35A is the ideal choice for deep well casing running, heavy workover rigs, and offshore drilling platforms handling casing up to 13‑3/8″ OD, where maximum torque, operator efficiency, and casing protection are critical.
Hyrig supplies all Teda tongs and genuine spares. For inquiries, pricing, or technical support, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.