The Teda TQ508/70 is an extra‑heavy‑duty, open‑type hydraulic power tong specifically engineered for making and breaking large‑diameter casing connections in deep drilling, heavy workover, surface casing running, and offshore platform operations. The “508” indicates a maximum gripping diameter of 508 mm (20 inches) , while the “70” represents its maximum torque rating of 70 kN·m (approx. 620,000 in·lb) , positioning this tong in the ultra‑high torque category for the largest casing sizes used in oil and gas wells.
This power tong is driven by a low‑speed, high‑torque hydraulic motor directly coupled with a heavy‑duty manual directional valve, ensuring reliable, compact, and field‑proven performance. The unit is supplied as a combination of a main tong and a hydraulic back‑up tong. By operating the directional valve on the main tong, the back‑up tong automatically clamps and releases the casing coupling in perfect synchronization – eliminating separate controls, reducing operator fatigue, and enhancing safety.
Both the main tong and the back‑up tong feature an inner‑curve cam roller climbing mechanism with a multiple‑jaw design for bi‑directional gripping. To reverse the rotation direction, the operator simply turns the direction knob on both tongs. Interchangeable snap‑in dies allow the same tong to handle a wide range of casing sizes, typically from 13‑3/8″ up to 20″ , and optional dies can extend to even larger diameters.
The TQ508/70 offers two mechanical speed ranges: low gear delivers the full 70 kN·m torque for initial breakout or final make‑up on the heaviest casing connections, while high gear enables faster spinning to run casing in or out efficiently. This two‑speed design optimizes cycle time while maintaining precise torque control under extreme loads.
Key features include:
Ultra‑high torque capacity (70 kN·m) – suitable for large surface and intermediate casing
Extra‑large gripping range up to 508 mm (20″) – handles common casing sizes 13‑3/8″ to 20″
Automatic hydraulic back‑up tong – sync clamping and releasing, no foot valve
Bi‑directional gripping – quick direction change via rotation knob
Tool‑less die change – snap‑in dies for different casing diameters
Two‑speed transmission – balance of heavy breakout and fast spinning
Extreme‑duty construction – designed for deep wells, offshore platforms, and heavy casing jobs
API compliant – meets API Spec 7K / 8C standards
The Teda TQ508/70 is the ideal choice for large‑diameter surface casing running, deep well workover rigs, and offshore drilling platforms handling casing up to 20″ OD, where maximum torque, operator efficiency, and casing protection are critical.
Hyrig supplies all Teda tongs and genuine spares. For inquiries, pricing, or technical support, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.