The TEDA XQ114/9W is an open‑type hydraulic power tong specifically engineered for the precise make‑up and break‑out of special thread connections and corrosion‑resistant alloy (C.R.A.) tubulars in oilfield well servicing and workover operations. The model designation “XQ114/9W” indicates a maximum master tong gripping diameter of 114 mm (4‑1/2 inches) , a low gear torque rating of 9,000 N·m (6,630 ft·lbs) , and the “W” suffix denotes its low‑stress (micro‑marking) capability.
This power tong is designed to address the critical challenge of protecting sensitive premium threads and high‑alloy pipe surfaces during make‑up and break‑out, making it an essential tool for modern completion and workover operations handling C.R.A. materials.
The XQ114/9W is specifically engineered for rapid make‑up and break‑out of special thread and special material tubulars, covering tubing from 2‑7/8″ to 4‑1/2″ and casing from 4‑1/2″ to 5‑1/2″ in well service operations. The tong is suitable for a comprehensive range of premium thread types, including FOX, VAM TOP, BGT1, 3SB, NSCC, TM, NS‑CT, and WSP threads on both tubing and casing. It also accommodates C.R.A. tubulars made of 9Cr, 13Cr, 22Cr, and 25Cr alloys, as well as other corrosion‑resistant materials commonly used in demanding downhole environments.
The low‑stress clamping capability is achieved through a high‑hardness tooth‑type design and the tri‑grip clamping mechanism (three‑jaw system) on both the master and backup tongs, which distributes gripping force evenly around the pipe circumference to minimize surface marking and eliminate stress concentrations that could lead to thread damage or galling. Additionally, fine‑toothed jaws are available as an option to further reduce damage to the pipe column.
The XQ114/9W is equipped with a four‑speed transmission system, providing a wide speed regulation range to optimize performance across different operational phases. Low gear delivers 9,000 N·m (6,630 ft·lbs) of torque at 15 RPM for heavy breakout and final make‑up, while high gear provides 1,670 N·m (1,232 ft·lbs) at 81 RPM for fast spinning operations. This two‑speed (in practical application, four‑shift) design offers a large gear shift step difference—high speed is fast while low gear delivers high torque—enabling operators to balance torque and speed according to specific connection requirements.
The tong operates at a rated pressure of 12 MPa (1,740 psi) with a flow rate of 100 L/min (26 GPM) , making it compatible with standard workover rig hydraulic systems. The combined main and backup tong assembly has compact dimensions of 900 × 570 × 600 mm (35.4″ × 22.4″ × 23.6″) and weighs only 260 kg (620 lbs) , offering excellent portability and ease of handling on the rig floor.
The XQ114/9W incorporates several advanced features that enhance its performance, durability, and operator safety:
Open‑type tong head – Allows quick positioning onto the pipe string without threading the tong over the coupling, saving rig time
Hydraulic backup tong – Operated from the main tong directional valve; clamps and releases automatically in sync with the main tong for efficient single‑operator control
Brake band type tong head brake mechanism – Simple and reliable structure with small wearing parts, large braking force, and convenient adjustment and maintenance
Pin‑type reversing device – Simple and reliable structure that is easy to replace
Interlocking device of safety door – Standard equipment that prevents operation unless the door is fully closed, significantly enhancing operator safety
Hydraulic torque indicator – Standard equipment for monitoring make‑up torque
Optional torque control system – Can be configured to display, record, and precisely control make‑up torque for data‑driven quality assurance and computerized management
Optional power unit with two pumps – For accurate torque control in sensitive applications
Optional anti‑pinching device – Prevents the pipe column from being pinched due to over‑torque use or pipe column corrosion
Optional hydraulic spring hoist – For easier handling on the rig floor
The TEDA XQ114/9W is the ideal choice for workover rigs, well servicing operations, and completion activities handling 2‑7/8″ to 4‑1/2″ tubing and 4‑1/2″ to 5‑1/2″ casing , where protection of premium threads and C.R.A. materials, operator efficiency, and connection integrity are critical. Its low‑stress clamping system, four‑speed gearbox, and comprehensive safety features deliver reliable, high‑quality make‑up and break‑out while minimizing the risk of pipe or thread damage.
Hyrig supplies all TEDA tongs and genuine spares. For inquiries, pricing, or technical support, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.