The TEDA XQ140/20W is a low‑stress, open‑type hydraulic power tong specifically engineered for making up and breaking out premium connections and corrosion‑resistant alloy (C.R.A.) tubulars in oilfield well servicing, workover, and completion operations. The model designation “XQ140/20W” indicates a maximum master tong gripping diameter of 140 mm (5‑1/2 inches), a maximum low gear torque rating of 21,000 N·m (15,480 ft·lbs), and the “W” suffix denotes its low‑stress or micro‑marking capability.
This tong is designed to address the critical challenge of protecting sensitive premium threads and C.R.A. pipe surfaces during make‑up and break‑out. Unlike conventional power tongs that can leave deep marks or cause galling on high‑alloy materials, the XQ140/20W incorporates several advanced features to minimize contact stress and eliminate surface damage.
The main tong features an inner‑curve cam roller climbing mechanism with double swing jaw plates. It can be equipped with specially designed arc‑tooth dies or pyramid tooth dies that distribute clamping force evenly over a larger area, significantly reducing peak contact pressure. The backup tong uses a hydraulic‑cylinder‑pushed three‑jaw‑plate structure with a floating connection that allows adjustment of the distance between main and backup tongs, further reducing induced bending stress on the pipe.
The XQ140/20W is powered by a low‑speed high‑torque hydraulic motor and is equipped with a four‑speed gearbox for wide speed regulation. Low gear delivers 21,000 N·m (15,480 ft·lbs) at 6 RPM for heavy breakout and final make‑up, while high gear provides 2,800 N·m (2,060 ft·lbs) at 51 RPM for fast spinning.
The operating pressure is 12 MPa (1,740 psi) with a flow rate of 100 L/min (26 GPM). The combined main and backup tong assembly weighs 950 kg (2,090 lbs) and has dimensions of 1,220 × 860 × 1,708 mm (48″ × 33.9″ × 67.3″).
A hydraulic torque indicator is supplied as standard, and an optional torque control system can display, record, and precisely control make‑up torque. A safety door interlock prevents operation unless the door is fully closed. The open‑type integral head provides excellent rigidity and ease of positioning on the pipe.
The XQ140/20W is ideally suited for running and pulling C.R.A. tubulars made of 9Cr, 13Cr, 22Cr, 25Cr, and other high‑alloy materials, as well as for handling premium threads such as VAM TOP, FOX, BGT1, 3SB, NSCC, TM, NS‑CT, and WSP. It offers both micro‑marking and non‑marking die options to match the specific requirements of each connection and material.
Hyrig supplies all TEDA tongs and genuine spares. For inquiries, pricing, or technical support, please contact info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.