The TEDA XQ29-1.8 is a hydraulic‑driven, open‑type sucker rod power tong specifically engineered for making up and breaking out sucker rod and small tubing connections in well workover and servicing operations. It converts hydraulic energy into mechanical torque through a synchronized main/backup system, inner curved roller ramp clamping, and a two‑speed gear train.
Model: TEDA XQ29-1.8
Type: Open‑type hydraulic sucker rod power tong
Application: Sucker rod (CYG series) and small tubing make‑up / breakout
How It Works – Core Operating Principle
1. Hydraulic Power System (Energy Source)
Power input: Pressure oil from the workover rig’s hydraulic pump (rated pressure 10 MPa, maximum flow 65 L/min) is directed through a manual reversing valve.
Core execution: A low‑speed, high‑torque hydraulic motor drives the main tong through a high/low gear reduction mechanism, delivering two operating modes:
High gear (fast spinning): 104 r/min, 700 N·m – for rapid spinning and pre‑tightening
Low gear (high torque): 40 r/min, 1800 N·m – for final make‑up or powerful breakout
Synchronized action: The reversing valve simultaneously controls the main tong motor AND the backup tong clamping cylinder. When the operator moves the handle forward (make‑up) or reverse (breakout), the backup tong automatically clamps or releases – no separate backup control is needed. This prevents rod string rotation and protects threads.
Torque control: Adjusting the system relief valve precisely controls make‑up torque. When the preset pressure/torque is reached, the valve relieves and rotation stops automatically – avoiding over‑torque (thread damage) or under‑torque (loose connection).
2. Jaw Clamping Principle – Inner Curved Roller Ramp (Core Mechanical Action)
Both the main and backup tongs use a bidirectional inner ramp clamping mechanism. The action happens in two stages:
Initial clamping: The tong jaws are open. The jaw carrier is locked by a brake hammer / reset mechanism. The open gear spins idle while rollers move along the inner curved ramp surface, pushing the jaws (with dies) inward to grip the sucker rod coupling or rod body. Clamping force increases automatically as rotation angle increases – self‑tightening under load.
After gripping: The jaw carrier rotates together with the open gear, driving the rod forward (make‑up) or reverse (breakout). When reversing direction, the reset mechanism / directional switch changes the ramp angle to enable bidirectional clamping and release.
Release: Reverse the control valve. The open gear rotates backward, rollers move down the ramp, and springs return the jaws to the open position – ready to remove the tong from the rod.
3. Complete Make‑up / Breakout Workflow
| Step | Action |
|---|---|
| Positioning | Open the tong head, place it over the sucker rod. Main tong grips above the coupling, backup tong below. |
| Valve operation | Move the manual reversing valve (forward = make‑up, reverse = breakout). Backup tong automatically clamps and holds the lower rod. |
| Spinning | High gear (104 r/min) rapidly spins to pre‑tighten / run threads. |
| Final torque | Shift to low gear (40 r/min, 1800 N·m). Tighten until the preset pressure/torque is reached – relief valve unloads, rotation stops automatically. |
| Release | Reverse the valve. Main and backup tongs simultaneously release. Jaws open. Remove the tong from the rod. |
Key Specifications – TEDA XQ29-1.8
| Parameter | Value |
|---|---|
| Model | TEDA XQ29-1.8 |
| Type | Open‑type, hydraulic sucker rod power tong |
| Working pressure | 10 MPa |
| Flow rate | ≤65 L/min |
| High gear – speed / torque | 104 r/min / 700 N·m |
| Low gear – speed / torque | 40 r/min / 1800 N·m |
| Clamping mechanism | Inner curved roller ramp (bidirectional, self‑tightening) |
| Control | Manual reversing valve – main & backup synchronized |
| Torque control | Adjustable relief valve |
| Jaw opening | Open‑type, easy pipe engagement |
| Weight | Approx. 95 kg |
| Standards | API (compliant) |
Why Choose the TEDA XQ29-1.8?
True synchronization – One lever controls both main rotation and backup clamping. No extra steps, no pipe twist.
Roller ramp self‑tightening – The harder you torque, the tighter the grip. No slippage, no thread galling.
Two speeds in one tong – Fast spinning for efficiency, high torque for final make‑up or stubborn breakout.
Thread protection – Precise torque control via relief valve, plus even clamping force distribution.
Open‑type convenience – Easy to place onto or remove from the rod string without lifting.
Genuine TEDA quality – Supplied by HYRIG, the authorized TEDA parts and tongs provider.
Applications
Sucker rod make‑up and breakout in workover operations
Small tubing connection handling
Conventional and stuck thread removal on rod strings
Onshore and offshore well servicing
Contact Us
For technical specifications, pricing, spare parts, or to order the TEDA XQ29-1.8 sucker rod power tong, please contact:
Email: info@hyrig.com
HYRIG – Your reliable source for TEDA hydraulic power tongs and genuine parts, from sucker rods to casing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.