Hyrig Low Pressure Charge Pump BB2 – API 610 Centrifugal Charge Pump

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Hyrig API 610 BB2 low pressure charge pump is designed for refinery feed, fractionator bottoms and petrochemical charge duties. Double suction impeller ensures low NPSH, balanced axial thrust and stable operation. Flow up to 7000 m³/h, head up to 350 m, inlet pressure ≤20 bar. Heavy-duty, centerline mounted, radially split casing. Reliable 24/7 continuous service. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

Hyrig offers a high-performance Low Pressure Charge Pump BB2 designed and manufactured in strict accordance with API 610 (ISO 13709), BB2 type. This horizontally mounted, radially split, double-suction centrifugal pump is specifically engineered for low pressure charge pump duties in refineries, petrochemical plants, and oil & gas processing facilities.

Why choose Hyrig Low Pressure Charge Pump BB2?
The double-suction impeller design significantly reduces NPSH requirement – a critical advantage for low pressure inlet conditions. It also inherently balances axial thrust, eliminating the need for complex balancing devices and improving mechanical reliability. The double volute casing balances radial forces, extending bearing and seal life.

Typical Operating Range

  • Flow: 30 – 7,000 m³/h (130 – 30,000 USgpm)

  • Head: 30 – 350 m (low pressure charge common range: 50 – 200 m)

  • Inlet pressure: ≤20 bar (≤290 psi)

  • Temperature: -30°C up to 425°C (suitable for light hydrocarbons, hot oil, distillates)

  • Design pressure (casing): ≤60 bar (low pressure version normally ≤50 bar)

  • Speed: 980 / 1480 / 2980 rpm (50/60Hz)

Key Applications

  • Refinery crude unit – atmospheric tower feed / charge

  • Hydrotreater and hydrocracker – unit charge pump

  • Fractionator bottoms charge

  • Coke heater charge

  • Reformer feed

  • Gas condensate and light end transfer

  • Low shear petrochemical duties

Design Features for Reliability

  • API 682 seal compatibility (ISO 21049)

  • Centerline mounting – maintains alignment under thermal expansion

  • Two-bearing support – rigid rotor dynamics

  • Radially split casing – maintenance-friendly (rotor removal without disturbing piping in many configurations)

  • Low vibration and low NPSH – ideal for continuous heavy-duty charge service

Comparison vs. High Pressure Charge Pump
Unlike BB3 axial split multistage pumps for high pressure (>100 bar), the Hyrig BB2 is dedicated to low pressure large flow charge duties where NPSH margin is often the limiting factor. It provides the most cost-effective and reliable solution for inlet pressures up to 20 bar.

Trusted by refineries and petrochemical plants – Hyrig BB2 low pressure charge pumps deliver thousands of hours of trouble-free operation, reducing unplanned downtime and maintenance costs.

Need a Low Pressure Charge Pump BB2 for your project?
Contact Hyrig for a technical datasheet, quotation, or application engineering support.

Email: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit