Hyrig Atmospheric Pump BB2 – API 610 Centrifugal Pump for Crude Unit Feed

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Hyrig API 610 BB2 atmospheric pump is designed for crude unit atmospheric tower feed and refinery charge services. Double suction impeller provides low NPSH, axial thrust balance, and stable operation. Flow up to 7000 m³/h, head up to 200 m, temperature to 425°C. Radially split, centerline mounted, API 682 seal ready. Continuous heavy-duty reliability. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

Hyrig provides a robust Atmospheric Pump BB2 designed and manufactured per API 610 (ISO 13709), BB2 type. This horizontally mounted, radially split, double-suction centrifugal pump is specifically engineered for atmospheric tower feed and crude unit charge duties in refineries. It is the preferred choice for transferring preheated crude oil (after desalting and preheat train) to the atmospheric distillation column under low pressure, high flow conditions.

Why choose Hyrig Atmospheric Pump BB2?
The double-suction impeller design significantly reduces NPSH requirement – a critical advantage when handling crude oil with limited suction head from storage or a preflash drum. It also inherently balances axial thrust, eliminating complex balancing devices and improving mechanical reliability. The double volute casing balances radial forces, extending bearing and seal life even during off-design operation.

Typical Operating Range

  • Flow: 30 – 7,000 m³/h (130 – 30,000 USgpm)

  • Head: 30 – 200 m (optimized for atmospheric tower charge: 50–150 m typical)

  • Inlet pressure: ≤20 bar (≤290 psi) – low pressure charge service

  • Temperature: -30°C up to 425°C (handles preheated crude oil up to 370°C+)

  • Design pressure (casing): ≤60 bar (typical low pressure version ≤50 bar)

  • Speed: 980 / 1480 / 2980 rpm (50/60Hz)

Key Applications for Atmospheric Pump BB2

  • Crude unit – atmospheric tower feed / charge pump (primary service)

  • Preflash column feed pump

  • Desalted crude transfer to preheat train

  • Heavy crude oil transfer in refineries (low pressure, high flow)

  • Low pressure large volume pumping in petrochemical plants

Design Features for Reliability in Atmospheric Service

  • API 682 seal compatibility (ISO 21049) – single or double mechanical seals

  • Centerline mounting – maintains alignment under thermal expansion from hot crude (up to 370°C+)

  • Two-bearing support – rigid rotor dynamics for low vibration

  • Radially split casing – allows rotor removal without disturbing piping (many configurations)

  • Low NPSH, low vibration – essential for continuous atmospheric tower charge service

Comparison: Atmospheric Pump BB2 vs. Other Charge Pumps
Unlike high pressure multistage pumps (BB3/BB5) used for hydrotreating or hydrocracking, the Hyrig Atmospheric Pump BB2 is dedicated to low pressure, high flow, moderate head refinery feed applications. It is the most cost-effective and reliable solution for crude unit atmospheric tower charge duties where NPSH margin is often the limiting factor.

Why refineries trust Hyrig Atmospheric Pump BB2
Thousands of operating hours in crude unit service – reducing unplanned downtime and maintenance costs. Our API 610 BB2 design meets the strictest industry requirements for vibration, bearing life, and seal reliability.

Need an Atmospheric Pump BB2 for your refinery project?
Contact Hyrig for a technical datasheet, custom quotation, or application engineering support.

Email: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit