TEG Pump OH2 Model Selection – Complete API 610 Series Technical Specifications

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
TEG Pump OH2 Model Selection – Complete API 610 Series Technical Specifications is a comprehensive guide to heavy-duty, centerline-mounted, radially split centrifugal pumps for triethylene glycol (TEG) in natural gas dehydration, aromatics extraction, and solvent recovery, featuring 20 models from 40-250 to 150-400, low‑shear anti‑foaming impeller (40% less foam), API 682 Type 22 seals with Plan 53A, 316L/2205/Hastelloy materials, and capacity/head ranges up to 550 m³/h and 350 m.

Conatct For Details
DetailReview(0)Additional

1. Product Overview

The OH2 Series TEG Pump is a horizontal, single-stage, single-suction, overhung, centerline-mounted, radially split centrifugal pump, strictly designed and manufactured in accordance with API 610 12th Edition (ISO 13709) international standards. It is purpose-built for demanding applications such as natural gas dehydration units, petrochemical aromatics extraction, chemical solvent recovery, and pharmaceutical purification. This pump is specifically engineered to handle triethylene glycol (TEG) , with media characteristics including viscosity 8.5–49 mPa·s (20°C–60°C), strong hygroscopicity (miscible with water in any ratio), high foaming tendency, operating temperature range -7°C to 180°C, and low toxicity without strong corrosivity. It achieves long‑term continuous operation (annual operation rate ≥99.7%) and is a critical equipment for TEG circulation, regeneration, and pressurization in natural gas dehydration systems.

Model Code Interpretation (OH2):

  • O = Overhung: Impeller outside bearing housing – compact structure, facilitates low‑shear design.

  • H = Horizontal: Horizontal mounting, compatible with TEG system layouts.

  • 2 = 2nd Generation: Centerline support design – superior thermal stability for temperature fluctuations (40–120°C).

Key API 610 Compliance Features:

  • Centerline mounting per API 610 9.1.1.1 – no rear bracket, free axial expansion.

  • Back pull-out design (DBSE per API 610 9.1.1.2) – rotor removal without disconnecting piping or motor.

  • Anti‑foaming & high‑viscosity optimization – flow path specifically designed for TEG to reduce bubble generation and improve efficiency.

2. Key Structural Features (TEG‑Specific Design)

  • Low‑Shear Anti‑Foaming Flow Path System: Low specific speed wide‑channel impeller (n_s = 80–150), flow path width ≥18 mm, blade with arc‑type low‑shear profile. CFD‑optimized for TEG flow, surface roughness Ra ≤0.8 μm to reduce turbulence and bubble generation. Inlet stabilization diffuser section, slow‑expansion outlet – foam suppression rate 40% higher than conventional pumps. SFI ≤0.3 per API 610 Appendix K for stable high‑viscosity operation without vibration‑induced foaming.

  • Moisture & Corrosion Resistant Material Selection: Wetted parts standard 316L stainless steel (Mo ≥2.2%) for TEG’s hygroscopic wet environment, preventing rust that could affect media purity. For natural gas dehydration with trace H₂S, use 2205 duplex steel (NACE MR0175). Shaft material 17-4PH precipitation hardening stainless steel, shaft sleeve silicon carbide ceramic – uniform corrosion rate ≤0.01 mm/year. For food/pharma grade, use Hastelloy C‑276.

  • Moisture‑Resistant Sealing System: Standard API 682 Type 22 double mechanical seals. Friction pairs: silicon carbide + graphite. Seal chamber with FKM O‑rings (TEG swell ≤3%). Leakage ≤2 ppm. Supports Plan 53A flush (externally pressurized nitrogen‑blanketed clean TEG) to prevent moisture ingress and corrosion – seal life ≥12,000 hours. For high temperature (>120°C), upgrade to cartridge seal + Plan 54 forced cooling.

  • Centerline Mounting Thermal Stability: Precision cast one‑piece casing. Shaft runout ≤0.02 mm from -7°C to 180°C. Bearing housing with water/air cooling fins, independent cooling chamber – oil temperature ≤80°C. Heavy‑duty bearings with oil mist lubrication – bearing life ≥30,000 hours.

3. General Technical Specifications (TEG‑Specific Parameters)

ParameterValue
Capacity5 – 2,800 m³/h (customizable to 3,000 m³/h) – supports small flow TEG circulation (5–50 m³/h) and large flow dehydration (500–2,800 m³/h)
Head20 – 350 m (max. 1,148 ft) – stable output at 8.5–49 mPa·s; high‑head for TEG regeneration
Operating Temperature-7°C to 180°C (common 40–120°C); high‑temp version to 200°C (chrome‑moly); low‑temp version to -20°C (A352 LCB)
Inlet Pressure-0.03 MPa to 0.3 MPa; Outlet Pressure: 0.2–15 MPa (standard 8 MPa, max 15 MPa)
Media CharacteristicsViscosity 8.5–49 mPa·s (20–60°C), strong hygroscopicity, high foaming, pH 6–8, trace H₂S ≤5%
Motor Power2.2 – 630 kW, efficiency ≥90% – power margin ≥15% for high‑viscosity service
Speed50Hz: 1,450/2,900 rpm; 60Hz: 1,750/3,500 rpm
Flange RatingClass 150/300/600# (RF, ASME B16.5); higher for high‑pressure dehydration
Material Options316L (standard TEG), 2205 duplex (sour service), Hastelloy C‑276 (food/pharma), chrome‑moly (high temp)
StandardsAPI 610 12th, GB/T 3215, NACE MR0175/ISO 15156, GB/T 19762

4. Global Equivalent Models (API 610 OH2 for TEG)

BrandSeries / ModelsKey Adaptation
Caterpillar (CAT)TEG series dedicatedNatural gas dehydration standard, 316L, pressure to 175 bar, temp ≤116°C
SulzerOHH 50-250, 80-315Aromatics extraction, low‑shear anti‑foaming, efficiency ≥85%, high‑viscosity TEG
FlowserveHPX 300, 400Large natural gas dehydration, Plan 53A flush, life ≥15,000 h
KSBKZE 65-200, 100-315Chemical solvent recovery, moisture‑resistant, NPSHr ≤3.5 m, low‑level tank transfer
NikkisoCZ-TEG seriesLeak‑free magnetic drive (API 685) for high‑purity TEG

5. Complete OH2 TEG Pump Model Lineup (20 Core Models by Size)

Small Bore (DN40/DN50 – Small Dehydration Units / Lab)

  • TEG Pump 40-250 OH2 – API 610 OH2, DN40, 250mm impeller, high pressure small flow. Capacity/Head: 25–50 m³/h / 80–110 m. Power: 18.5 kW. Application: Small natural gas dehydration, lab TEG circulation.

  • TEG Pump 40-315 OH2 – DN40, 315mm impeller, ultra‑high head. Capacity/Head: 20–45 m³/h / 120–160 m. Power: 22 kW. Application: TEG high‑pressure regenerator feed, small solvent recovery booster.

  • TEG Pump 50-160 OH2 – DN50, 160mm impeller, general small flow. Capacity/Head: 30–60 m³/h / 35–50 m. Power: 11 kW. Application: Pharmaceutical TEG transfer, small aromatics extraction circulation.

  • TEG Pump 50-200 OH2 – DN50, 200mm impeller, standard. Capacity/Head: 30–65 m³/h / 50–70 m. Power: 15 kW. Application: Chemical solvent recovery, small natural gas dehydration main pump.

  • TEG Pump 50-250 OH2 – DN50, 250mm impeller, high pressure. Capacity/Head: 30–65 m³/h / 80–115 m. Power: 22 kW. Application: High‑viscosity TEG boosting, small long‑distance pipeline.

Medium Bore (DN65/DN80 – Medium Dehydration / Plant Centralized)

  • TEG Pump 65-160 OH2 – DN65, 160mm impeller, medium flow low pressure. Capacity/Head: 50–100 m³/h / 32–48 m. Power: 18.5 kW. Application: Medium gas processing plant, workshop TEG circulation main pump.

  • TEG Pump 65-200 OH2 – DN65, 200mm impeller, medium flow general. Capacity/Head: 50–110 m³/h / 48–72 m. Power: 30 kW. Application: Petrochemical aromatics extraction, medium TEG regenerator feed.

  • TEG Pump 65-250 OH2 – DN65, 250mm impeller, medium flow high pressure. Capacity/Head: 50–110 m³/h / 75–110 m. Power: 45 kW. Application: Long‑distance TEG pipeline, medium natural gas dehydration booster.

  • TEG Pump 65-315 OH2 – DN65, 315mm impeller, medium flow ultra‑high head. Capacity/Head: 45–100 m³/h / 120–160 m. Power: 75 kW. Application: High‑pressure TEG atomization, mountainous gas pipeline dehydration.

  • TEG Pump 80-160 OH2 – DN80, 160mm impeller, large flow low pressure. Capacity/Head: 80–160 m³/h / 30–48 m. Power: 37 kW. Application: Large natural gas dehydration pretreatment, workshop central TEG circulation.

  • TEG Pump 80-200 OH2 – DN80, 200mm impeller, main duty. Capacity/Head: 80–160 m³/h / 48–72 m. Power: 55 kW. Application: Large aromatics extraction, medium TEG dehydration main pump.

  • TEG Pump 80-250 OH2 – DN80, 250mm impeller, large flow medium‑high pressure. Capacity/Head: 80–160 m³/h / 75–115 m. Power: 90 kW. Application: Long‑distance TEG main pipeline, large natural gas dehydration feed.

  • TEG Pump 80-315 OH2 – DN80, 315mm impeller, large flow high pressure. Capacity/Head: 75–150 m³/h / 120–165 m. Power: 132 kW. Application: Ultra‑high pressure TEG regeneration, large gas processing terminal.

Large Bore (DN100/DN125/DN150 – Large Scale / Plant‑Wide)

  • TEG Pump 100-200 OH2 – DN100, 200mm impeller, very large flow. Capacity/Head: 120–220 m³/h / 45–70 m. Power: 75 kW. Application: Extra‑large gas processing plant, plant‑wide TEG circulation.

  • TEG Pump 100-250 OH2 – DN100, 250mm impeller, very large flow medium pressure. Capacity/Head: 120–220 m³/h / 70–110 m. Power: 160 kW. Application: Cross‑border gas pipeline dehydration, large refining TEG main pump.

  • TEG Pump 100-315 OH2 – DN100, 315mm impeller, very large flow high pressure. Capacity/Head: 120–220 m³/h / 115–160 m. Power: 250 kW. Application: Ultra‑large TEG regeneration, million‑m³/h gas dehydration.

  • TEG Pump 100-400 OH2 – DN100, 400mm impeller, very large flow ultra‑high head. Capacity/Head: 110–210 m³/h / 180–240 m. Power: 400 kW. Application: Long‑distance high‑pressure TEG network, world‑class gas dehydration main pump.

  • TEG Pump 125-250 OH2 – DN125, 250mm impeller, giant flow. Capacity/Head: 200–350 m³/h / 65–100 m. Power: 200 kW. Application: National gas dehydration base, large petrochemical TEG main pump.

  • TEG Pump 125-315 OH2 – DN125, 315mm impeller, giant flow high pressure. Capacity/Head: 200–350 m³/h / 110–155 m. Power: 315 kW. Application: Ultra‑large gas processing terminal, cross‑border refinery TEG transfer.

  • TEG Pump 150-315 OH2 – DN150, 315mm impeller, extra‑large flow. Capacity/Head: 300–550 m³/h / 90–140 m. Power: 450 kW. Application: Global large gas dehydration hub, ultra‑large aromatics extraction pump.

  • TEG Pump 150-400 OH2 – DN150, 400mm impeller, top large flow high pressure. Capacity/Head: 300–550 m³/h / 160–220 m. Power: 630 kW. Application: World‑class gas pipeline dehydration project, global top refinery TEG pump.

6. Selection Notes (TEG‑Specific)

  • Viscosity matching: Determine TEG viscosity based on operating temperature (49 mPa·s at 20°C, 8.5 mPa·s at 60°C). Ensure pump high‑efficiency zone matches actual viscosity to avoid overload at low viscosity or low efficiency at high viscosity.

  • Material selection: 316L for standard TEG (most economical); 2205 duplex for H₂S‑containing natural gas dehydration (require NACE MR0175); Hastelloy C‑276 for food/pharma grade.

  • Seal flush plan: Plan 53A for normal service; for high temperature (>120°C) or high humidity, use Plan 54 forced cooling flush to prevent moisture ingress and corrosion.

  • Cavitation control: Higher TEG temperature raises vapor pressure – ensure NPSHa ≥ NPSHr + 1.5 m. Lower pump installation height, increase suction pipe diameter, add inducer if needed.

  • Anti‑foaming optimization: Avoid throttling‑induced turbulence. Ensure operating point within high‑efficiency zone (design flow ±10%). Install foam breaker at pump discharge if necessary.

7. Contact Us

For detailed technical datasheets, model selection assistance (free selection report with TEG operating temperature, flow/head, H₂S content), 3D models (STEP/IGES), certification documents (API 610, NACE MR0175, material spectral analysis), and customized solutions (natural gas dehydration dedicated, high‑temp TEG, food‑grade TEG transfer), please contact:

Email: info@hyrig.com

Our engineering team responds within 24 hours with API 610 compliant solutions tailored to your TEG and natural gas dehydration needs.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit