The following index lists the major structural, mechanical, and hydraulic components for the 7 1/16" 5M Hydraulic Townsend BOP.
| Description | Part Number |
|---|---|
| Alignment Plug & Bonnet O-ring | TH815 |
| 1/4" NPT Pipe Plug | TH816 |
| Bolt f/ Cylinder | TH818 |
| Cylinder O-ring | TH8117 |
| Door Manifold O-ring | TH8118 |
| Piston O-ring | TH8119 |
| Manifold Tube O-ring | TH8120 |
| Piston | TH8130 |
| Cylinder | TH8131 |
| Balance Stem | TH8132 |
| MOR Protector | TH8133 |
| Locking Shaft | TH8134 |
| Ram Shaft | TH8135 |
| Manifold Tube | TH8136 |
| Bonnet | TH8137 |
| Symptom | Action |
|---|---|
| Hydraulic fluid leaks around the cylinder | Replace the Cylinder O-ring (TH8117) and Piston O-ring (TH8119). |
| BOP does not hold pressure in closed position | Inspect and replace the Piston Seal / Crown Seal (TH8123). |
| Fluid leaking at manifold connections | Replace the manifold O-rings (TH8118, TH8120) during servicing. |
Email info@hyrig.com with:
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.