Maintain well control integrity with HYRIG's fully interchangeable seal kits for the 7 1/16" 5M Hydraulic Townsend BOP. Designed to withstand higher operating pressures and hydraulic actuation forces.
| Description | Part Number |
|---|---|
| Complete Seal Kit (Hydraulic) | TH81005-1K |
| Ram Shaft O-ring | TH8115 |
| O-RING Packing Gland | TH8116 |
| Door Gasket | TH8121 |
| Ram Shaft Wiper Ring | TH8122 |
| Piston Seal / Crown Seal | TH8123 |
| Packing Gland | TH8124 |
| Packing Assembly | TH8125 |
| Objective | Action |
|---|---|
| Complete BOP overhaul | Order the Complete Seal Kit (TH81005-1K) to replace all elastomers systematically. |
| Fixing a leak around the ram shaft | Replace the Ram Shaft O-ring (TH8115) and Wiper Ring (TH8122). |
| Addressing sluggish hydraulic actuation | Inspect and replace the Piston Seal / Crown Seal (TH8123). |
Pay strict attention to the orientation of the Ram Shaft Wiper Ring (TH8122). The wiper ring features a specific lip direction designed to prevent wellbore debris from entering the hydraulic system. Installing it backward may cause system contamination and seal failure.
Email info@hyrig.com with:
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.