VICKERS DG4V-3S-0C-M-U-H5-60 Directional Valve
Overview:
HYRIG can supply the VICKERS DG4V-3S-0C-M-U-H5-60 and related hydraulic components. This NG6 directional valve uses a 0C spool, which blocks the P port and connects A and B to T in the centre position.
The 0C spool blocks the P port and connects A and B to T in the centre position. This is useful for circuits where the pump must be isolated while the actuator is allowed to float or return to tank.
Verify the spool type (0C), voltage (H = 24V DC), and spring arrangement (spring centred) when replacing. The 60 series has unchanged installation dimensions.
Used in VICKERS NG6 directional valve stacks. For related components, view VICKERS DG4V Directional Valves.
Need to confirm the spool type or voltage for your application? Contact HYRIG with your requirements.
Suitable for machine tools and hydraulic systems requiring P-port isolation with A/B connected to tank in the centre position.
Disclaimer: VICKERS is a registered trademark of Eaton Corporation / Danfoss. HYRIG is an independent supplier of hydraulic components and is not affiliated with Eaton or Danfoss.
Specifications:
Contact Us:
For VICKERS DG4V-3S-0C-M-U-H5-60 selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.