VICKERS DG4V-3-2A-M-U-H7-60 Directional Valve
Overview:
HYRIG can supply the VICKERS DG4V-3-2A-M-U-H7-60 and related hydraulic components. This NG6 directional valve uses a 2A spool, which blocks all ports (P, T, A, B) in the centre position, holding the actuator in place.
The 2A spool blocks all ports in the centre position, providing a "closed centre" function. This holds the actuator in position when the valve is centred, which is essential for load-holding applications.
Verify the spool type (2A), voltage (H = 24V DC), and spring arrangement (spring centred) when replacing. The 60 series has unchanged installation dimensions.
Used in VICKERS NG6 directional valve stacks. For related components, view VICKERS DG4V Directional Valves.
Need to confirm the spool type or voltage for a load-holding application? Contact HYRIG with your requirements.
Suitable for machine tools, clamping circuits, and applications requiring the actuator to hold position when the valve is centred.
Disclaimer: VICKERS is a registered trademark of Eaton Corporation / Danfoss. HYRIG is an independent supplier of hydraulic components and is not affiliated with Eaton or Danfoss.
Specifications:
Contact Us:
For VICKERS DG4V-3-2A-M-U-H7-60 selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.