VICKERS DG4V-5-0A-M-U-H7-20 Directional Valve
Overview:
HYRIG can supply the VICKERS DG4V-5-0A-M-U-H7-20 and related hydraulic components. This NG10 directional valve uses a 0A spool, which blocks the P port and connects A and B to T in the centre position.
The 0A spool blocks the P port and connects A and B to T in the centre position. This allows the pump to be isolated while the actuator is allowed to float or return to tank.
Verify the spool type (0A), voltage (H = 24V DC), and spring arrangement (spring centred) when replacing. The 20 series has unchanged installation dimensions.
Used in VICKERS NG10 directional valve stacks. For related components, view VICKERS DG4V Directional Valves.
Need to confirm the spool type or T-port rating for an NG10 circuit? Contact HYRIG with your system parameters.
Suitable for medium-to-high flow hydraulic systems requiring P-port isolation with A/B connected to tank.
Disclaimer: VICKERS is a registered trademark of Eaton Corporation / Danfoss. HYRIG is an independent supplier of hydraulic components and is not affiliated with Eaton or Danfoss.
Specifications:
Contact Us:
For VICKERS DG4V-5-0A-M-U-H7-20 selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.