VICKERS DG4V-5-2A-M-U-H7-20 Directional Valve
Overview:
HYRIG can supply the VICKERS DG4V-5-2A-M-U-H7-20 and related hydraulic components. This NG10 directional valve uses a 2A spool, which blocks all ports (P, T, A, B) in the centre position, holding the actuator in place.
The 2A spool blocks all ports in the centre position, providing a "closed centre" function. This holds the actuator in position when the valve is centred, essential for load-holding applications.
Verify the spool type (2A), voltage (H = 24V DC), and spring arrangement (spring centred) when replacing. The 20 series has unchanged installation dimensions.
Used in VICKERS NG10 directional valve stacks. For related components, view VICKERS DG4V Directional Valves.
Need to confirm the spool type or T-port rating for a load-holding application? Contact HYRIG with your system parameters.
Suitable for medium-to-high flow hydraulic systems requiring load-holding or position-locking.
Disclaimer: VICKERS is a registered trademark of Eaton Corporation / Danfoss. HYRIG is an independent supplier of hydraulic components and is not affiliated with Eaton or Danfoss.
Specifications:
Contact Us:
For VICKERS DG4V-5-2A-M-U-H7-20 selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.