VICKERS DGMDC Pressure Reducing Valve Series | NG6, NG10

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the VICKERS DGMDC series. These are pressure reducing valves in sandwich plate design, available in NG6 and NG10, with P, T, A, or B port control options.
Conatct For Details
DetailReview(0)Additional

VICKERS DGMDC Pressure Reducing Valve Series

Overview:

HYRIG can supply the VICKERS DGMDC series and related hydraulic components. These sandwich-mounted valves reduce pressure in a secondary circuit to a constant level, independent of primary circuit fluctuations.

Key Specifications & Model Comparison

Model CodeSizeControl PortCracking PressureMax Flow
DGMDC-3-Y-PK-41NG6P1 bar60 L/min
DGMDC-3-X-TK-41NG6T1 bar60 L/min
DGMDC-3-X-AK-41NG6A1 bar60 L/min
DGMDC-3-X-BK-41NG6B1 bar60 L/min
DGMDC-3-Y-A-BK-41NG6A & B1 bar60 L/min
DGMDC-5-Y-A-BK-30NG10A & B1 bar120 L/min

Data source: VICKERS by Danfoss PowerSource and distributor listings.

For the NG6 P-port 1 bar variant, view VICKERS DGMDC-3-Y-PK-41.

Dimensions (Text-Based)

ParameterNG6NG10
Mounting StandardISO 4401-03ISO 4401-05
Mounting Bolt Pattern4 × M54 × M6
Approx. Weight1.0 kg2.9 kg

Cross-Reference & Replacement

The Y code indicates P-port control. X-T/X-A/X-B indicate T/A/B port control. Y-A-B indicates dual A&B control. The K/M/N code specifies cracking pressure (1/2.5/5 bar). All code positions must match when replacing.

Selection Support

Need to confirm which control port or cracking pressure is correct for your circuit? Contact HYRIG with your system parameters.

Applications

Used for stable pressure reduction in pilot circuits, clamping systems, or specific actuators without affecting the main system pressure.

Disclaimer: VICKERS is a registered trademark of Eaton Corporation / Danfoss. HYRIG is an independent supplier of hydraulic components and is not affiliated with Eaton or Danfoss.

Specifications:

  • Valve Type: Pressure reducing valve (sandwich plate)
  • Sizes: NG6 (DGMDC-3), NG10 (DGMDC-5)
  • Maximum Operating Pressure: 315 bar (4500 psi)
  • Maximum Flow: NG6: 60 L/min; NG10: 120 L/min
  • Control Ports: P (Y-type), T (X-T), A (X-A), B (X-B), A&B (Y-A-B)
  • Cracking Pressure Codes: K = 1 bar, M = 2.5 bar, N = 5 bar

Contact Us:

For VICKERS DGMDC series selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit