VICKERS DGMPC Pilot Check Valve Series | NG6, NG10, NG16

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the VICKERS DGMPC series. These are pilot-operated check valves in sandwich plate design, available in NG6, NG10, and NG16, with single or dual channel configurations.
Conatct For Details
DetailReview(0)Additional

VICKERS DGMPC Pilot Check Valve Series

Overview:

HYRIG can supply the VICKERS DGMPC series and related hydraulic components. These sandwich-mounted pilot-operated check valves allow free flow in one direction and blocked flow in reverse, which can be released by pilot pressure.

Key Specifications & Model Comparison

Model CodeSizeConfigurationCracking PressureMax Flow
DGMPC-3-ABK-BAK-41NG6A & B (dual)1 bar60 L/min
DGMPC-3-ABK-41NG6A only1 bar60 L/min
DGMPC-3-BAK-41NG6B only1 bar60 L/min
DGMPC-5-ABK-30NG10A only1 barContact factory
(F3)DGMPC-7-ABK-BAK-11NG16A & B (dual)1 barContact factory

Data source: VICKERS by Danfoss PowerSource and distributor listings.

For the NG6 dual A&B configuration, view VICKERS DGMPC-3-ABK-BAK-41.

Note: (F3) prefix indicates phosphate ester fluid compatibility.

Dimensions (Text-Based)

ParameterNG6NG10NG16
Mounting StandardISO 4401-03ISO 4401-05ISO 4401-07
Mounting Bolt Pattern4 × M54 × M64 × M10

Cross-Reference & Replacement

AB = A-line check, BA = B-line check, AB-BA = dual A&B check. K/M/N = cracking pressure 1/2.5/5 bar. The (F3) prefix is for phosphate ester fluids; standard models omit it. All code positions must match when replacing.

Selection Support

Need to confirm whether single (AB or BA) or dual (AB-BA) configuration is required? Contact HYRIG with your circuit requirements.

Applications

Used for load-holding and pilot-line isolation in hydraulic systems, particularly where a pilot signal is available to release the check valve.

Disclaimer: VICKERS is a registered trademark of Eaton Corporation / Danfoss. HYRIG is an independent supplier of hydraulic components and is not affiliated with Eaton or Danfoss.

Specifications:

  • Valve Type: Pilot-operated check valve (sandwich plate)
  • Sizes: NG6 (DGMPC-3), NG10 (DGMPC-5), NG16 (DGMPC-7)
  • Maximum Operating Pressure: 315 bar (4500 psi)
  • Maximum Flow: NG6: 60 L/min
  • Configurations: AB (A-line check), BA (B-line check), AB-BA (dual A&B check)
  • Cracking Pressure Codes: K = 1 bar, M = 2.5 bar, N = 5 bar

Contact Us:

For VICKERS DGMPC series selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit