VICKERS 4CG Pilot Check Valve Series
Overview:
HYRIG can supply the VICKERS 4CG series and related hydraulic components. These subplate-mounted pilot-operated check valves allow free flow in one direction and blocked flow in reverse, which can be released by external pilot pressure.
| Model Code | Size | Cracking Pressure | Max Pressure | Max Flow |
|---|---|---|---|---|
| 4CG-03 | NG6 | Specify A/C/F | 210 bar | 50 L/min |
| 4CG-06 | NG10 | Specify A/C/F | 210 bar | 125 L/min |
| 4CG-10 | NG16 | Specify A/C/F | 210 bar | 315 L/min |
| 4CG-10-DF-21 | NG16 | F (1.05 MPa) | 210 bar | 315 L/min |
| 4CG-06-C-21 | NG10 | C (0.53 MPa) | 210 bar | 125 L/min |
Data source: Eaton Vickers catalog GB-2340A and distributor listings.
For the NG16 decompression variant, view VICKERS 4CG-10-DF-21. For the NG10 standard variant, view VICKERS 4CG-06-C-21.
Note: The cracking pressure code (A/C/F) must be specified in the full model code.
| Parameter | NG6 | NG10 | NG16 |
|---|---|---|---|
| Mounting Standard | ISO 5781 | ISO 5781 | ISO 5781 |
| Connection | Subplate | Subplate | Subplate |
A = 0.21 MPa, C = 0.53 MPa, F = 1.05 MPa cracking pressure. D = decompression feature (optional). GE5 = external drain (optional). The 20/21 design series has unchanged installation dimensions. All code positions must match when replacing.
Not sure which cracking pressure (A/C/F) or whether decompression (D) is required? Contact HYRIG with your system requirements.
Used for load-holding and pilot-line isolation in high-flow hydraulic systems where subplate mounting is preferred.
Disclaimer: VICKERS is a registered trademark of Eaton Corporation / Danfoss. HYRIG is an independent supplier of hydraulic components and is not affiliated with Eaton or Danfoss.
Specifications:
Contact Us:
For VICKERS 4CG series selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.