VICKERS DGMFN-3-X-A-B Flow Control Valve
Overview:
HYRIG can supply the VICKERS DGMFN-3-X-A-B and related hydraulic components. This NG6 valve provides meter-in flow control on both A and B lines, with free reverse flow away from the actuator.
The X code indicates meter-in control. Flow entering the actuator is throttled, while reverse flow (away from the actuator) passes freely through the integral check valve.[reference:30]
Confirm the X (meter-in) function when replacing. An X valve controls flow entering the actuator; a Y valve (meter-out) controls flow leaving it. They are not interchangeable.
Used in VICKERS SystemStak™ NG6 vertical stacks. For related components, view VICKERS SystemStak Flow Control Valves.
Need to confirm the adjustment type or 02- part number for an X-configuration valve? Contact HYRIG with your requirements.
Suitable for machine tools and hydraulic systems where meter-in speed control is preferred.
Disclaimer: VICKERS is a registered trademark of Eaton Corporation / Danfoss. HYRIG is an independent supplier of hydraulic components and is not affiliated with Eaton or Danfoss.
Specifications:
Contact Us:
For VICKERS DGMFN-3-X-A-B selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.