VICKERS DGMFN-5-X-A-B Flow Control Valve
Overview:
HYRIG can supply the VICKERS DGMFN-5-X-A-B and related hydraulic components. This NG10 valve provides meter-in flow control on both A and B lines, with free reverse flow away from the actuator.
The X code indicates meter-in control. Flow entering the actuator is throttled, while reverse flow passes freely through the integral check valve.[reference:32]
Confirm the X (meter-in) function when replacing. The X and Y configurations are not interchangeable.
Used in VICKERS SystemStak™ NG10 vertical stacks. For related components, view VICKERS SystemStak Flow Control Valves.
Need to verify the 02- part number or adjustment type for an X-configuration DGMFN-5? Contact HYRIG with your full model code.
Suitable for medium-flow hydraulic systems where meter-in speed control is required.
Disclaimer: VICKERS is a registered trademark of Eaton Corporation / Danfoss. HYRIG is an independent supplier of hydraulic components and is not affiliated with Eaton or Danfoss.
Specifications:
Contact Us:
For VICKERS DGMFN-5-X-A-B selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.