VICKERS DGMFN-3-Y-A2W-B2W-41 Flow Control Valve
Overview:
HYRIG can supply the VICKERS DGMFN-3-Y-A2W-B2W-41 and related hydraulic components. This is a SystemStak™ modular flow control valve used for precise actuator speed regulation in both A and B service lines.
The Y in the model code signifies meter-out control. The valve limits flow leaving the actuator, which is essential for controlling negative loads and preventing runaway. The integral check valve allows free flow in the reverse direction (towards the actuator).[reference:21]
The Y in the model code signifies meter-out control. When replacing, verify whether the original was meter-out (Y) or meter-in (X). Installing an X valve where a Y was specified will reverse the flow control behavior.
Used in VICKERS SystemStak™ vertical stacks. For related components, view VICKERS SystemStak Flow Control Valves.
Need to confirm the adjustment type (A2W vs. B2W) or the exact 02- part number? Provide the full nameplate code, and HYRIG will match the replacement precisely.
Suitable for machine tools, injection molding machines, and hydraulic systems requiring independent speed control of both actuator directions.
Disclaimer: VICKERS is a registered trademark of Eaton Corporation / Danfoss. HYRIG is an independent supplier of hydraulic components and is not affiliated with Eaton or Danfoss.
Specifications:
Contact Us:
For VICKERS DGMFN-3-Y-A2W-B2W-41 selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.