VICKERS DGMFN-5-Y-A2W-B2W-30 Flow Control Valve
Overview:
HYRIG can supply the VICKERS DGMFN-5-Y-A2W-B2W-30 and related hydraulic components. This NG10 SystemStak™ valve provides independent meter-out flow control for both A and B lines.
The Y code indicates meter-out control. Flow leaving the actuator is throttled, while reverse flow (towards the actuator) passes freely through the integral check valve.
When replacing this valve, confirm the Y (meter-out) function and the 30 design code. The 02- part number (867332) corresponds to the exact model code listed here.
Used in VICKERS SystemStak™ NG10 vertical stacks. For related components, view VICKERS SystemStak Flow Control Valves.
Need to verify the 02- part number for a different DGMFN-5 configuration? Provide the full nameplate code, and HYRIG will confirm.
Suitable for medium-flow hydraulic systems requiring independent speed control of both actuator directions.
Disclaimer: VICKERS is a registered trademark of Eaton Corporation / Danfoss. HYRIG is an independent supplier of hydraulic components and is not affiliated with Eaton or Danfoss.
Specifications:
Contact Us:
For VICKERS DGMFN-5-Y-A2W-B2W-30 selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.