High‑performance water pump for moving clean or slightly dirty water in residential, agricultural, commercial, and industrial settings. Centrifugal, self‑priming, multistage, and submersible configurations. Cast iron, stainless steel or engineered plastic. Flows to 1,200 m³/h, heads to 150 m. Energy

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
High‑performance water pump for moving clean or slightly dirty water in residential, agricultural, commercial, and industrial settings. Centrifugal, self‑priming, multistage, and submersible configurations. Cast iron, stainless steel or engineered plastic. Flows to 1,200 m³/h, heads to 150 m. Energy‑efficient motors, mechanical seals, easy maintenance. Ideal for irrigation, pressure boosting, tank filling, HVAC circulation, and water transfer.

Conatct For Details
DetailReview(0)Additional

Product Overview

A water pump is a centrifugal pump designed to move clean or slightly dirty water from one location to another. It is one of the most common pump types used across residential, agricultural, commercial, and industrial sectors. Whether you need to irrigate a field, boost low mains pressure in a building, fill a storage tank, circulate water in a heating or cooling system, or drain a flooded basement, there is a water pump configuration suited to the task.

Our water pump range includes several configurations to match your application:

  • End suction centrifugal pump – Standard industrial pump for clean water, high efficiency, wide flow range.

  • Self‑priming centrifugal pump – Ideal for suction lift applications (pump above water source).

  • Vertical multistage pump – High pressure, low flow, compact footprint for boosting and reverse osmosis.

  • Horizontal multistage pump – High pressure, medium flow, for boiler feed and pressure boosting.

  • Submersible pump – Underwater operation, for wells, sumps, drainage.

  • Jet pump – Self‑priming with ejector, for shallow wells and garden supply.

All pumps are built with corrosion‑resistant materials (cast iron, stainless steel, or engineered plastic), high‑efficiency motors, and reliable mechanical seals.

Key Technical Specifications (General Range)

ParameterSmall / DomesticMedium / AgriculturalLarge / Industrial
Flow range1 – 10 m³/h10 – 100 m³/h100 – 1,200 m³/h
Head range5 – 40 m10 – 60 m15 – 150 m
Motor power0.37 – 1.5 kW2.2 – 15 kW18 – 250 kW
Speed2,900 rpm1,450 / 2,900 rpm980 / 1,450 rpm
Inlet / outlet size1″ – 1.5″2″ – 4″5″ – 10″
Liquid temperature0 – 40°C0 – 60°C–20 to +120°C
MaterialsCast iron / 304 SS / plasticCast iron / 304 SS / 316L SSCast iron / 316L SS / duplex

Pump Configurations – Which One Do You Need?

ApplicationRecommended Pump TypeKey Features
Garden irrigation, small tank fillingSelf‑priming jet pump or centrifugalSuction lift up to 8 m, compact, pressure switch option
High‑rise building water boostingVertical multistage pump, VFD controlledHigh pressure, small footprint, constant pressure
Agricultural irrigation (sprinklers, pivot)End suction centrifugal (high flow)Flows to 500 m³/h, efficient, durable
HVAC chilled / hot water circulationEnd suction or vertical in‑line pumpQuiet, continuous duty, high efficiency
Boiler feed (low to medium pressure)Horizontal or vertical multistageHigh pressure (150‑400 m) , low NPSH
Reverse osmosis feedVertical multistage stainless steelHigh pressure, corrosion resistant (316L)
Dewatering construction pitSubmersible or self‑priming centrifugalHandles silt, portable, float switch option
Raw water intake / lift stationEnd suction (wet pit) or submersibleHigh flow, rugged construction

Materials – Choosing the Right Grade

Fluid TypeRecommended MaterialWhy
Clean cold waterCast iron with epoxy coatingCost‑effective, corrosion resistant for most water
Hot water (>60°C)Cast iron with mechanical seal upgrade (Viton)Standard seals fail at high temperature
Demineralised / RO water304 or 316L stainless steelPrevents corrosion and contamination
Seawater / brackish waterDuplex or super duplex stainless steelResists chloride pitting
Slightly dirty water (sand, silt)Cast iron with hardened impeller or rubber liningAbrasion resistance

For most residential and agricultural clean water applications, cast iron with epoxy coating is sufficient and affordably priced.

Mechanical Seal – Standard and Options

ServiceSeal FacesElastomerSuitability
Cold clean waterCarbon vs. ceramicNBR (Buna‑N)Standard, long life
Hot water (≤90°C)Silicon carbide vs. carbonVitonHigh temperature
Slightly abrasive waterSilicon carbide vs. silicon carbideVitonResists sand erosion
Aggressive chemicalsTungsten carbideViton / AflasFor industrial water treatment

The seal chamber is designed for easy replacement without fully dismantling the pump.

Motor Options

  • Single‑phase (230V / 110V) – For domestic and light commercial use (up to 2.2 kW). Plug into standard outlet.

  • Three‑phase (400V / 460V) – For industrial, agricultural, and heavy commercial (0.55 – 315 kW). Higher efficiency, suitable for VFD.

  • IE3 / IE4 efficiency – Premium efficiency motors reduce energy consumption and lifetime cost.

  • Enclosure – IP55 (dust and water jets) standard; IP65 for harsh environments.

  • Thermal protection – Built‑in overload (auto‑reset or manual) on single‑phase motors.

Special Features

FeatureBenefit
Self‑primingNo foot valve or manual filling – draws water up from 8 m lift. Essential for garden and shallow well pumps.
Pressure switch + small tankAutomatic start/stop – pump turns on when tap opens, off when closed.
Variable frequency drive (VFD)Constant pressure, energy savings, soft start. For VFD‑ready pumps.
Float switchAutomatic operation in sumps and wells – starts when water level rises.
Back pull‑out designMaintenance without disturbing piping – reduces downtime.
Stainless steel shaftResists rust, prolongs seal life.
Baseplate or in‑line mountingFlexible installation options.

Applications in Detail

Residential & Garden

  • Boosting low mains pressure to showers, washing machines, and multiple taps.

  • Pumping from rainwater tanks to garden hoses, sprinklers, or toilets.

  • Emptying swimming pools, ponds, or flooded basements.

Agricultural & Irrigation

  • Supplying water from rivers, ponds, or wells to sprinkler systems and centre pivots.

  • Filling livestock troughs.

  • Transfer from storage dams to irrigation networks.

Commercial & Light Industrial

  • HVAC (heating, cooling, condenser water) circulation.

  • Pressure boosting in hotels, schools, hospitals, and office buildings.

  • Cooling tower water circulation.

  • Wash‑down systems for factories, car washes, food processing.

Municipal & Heavy Industrial

  • Raw water intake from rivers and lakes.

  • Boiler feed water (power plants, industrial boilers).

  • Reverse osmosis pre‑treatment and high‑pressure feed.

  • Firewater systems (pump sets compliant with NFPA/EN).

Installation Tips

  • End suction pump – Must be placed on a solid base, grouted. Ensure suction pipe is flooded (or use self‑priming version).

  • Vertical inline pump – Installs directly into pipeline; support piping near pump. No baseplate required.

  • Submersible pump – Lower into water; ensure bottom is clear of mud; use guide rails for permanent install.

  • Suction piping – Keep short, use eccentric reducer (flat on top). Avoid air pockets.

  • Discharge piping – Install check valve and isolation valve. Provide min flow recirculation for multistage pumps.

Maintenance

TaskFrequency
Check for leaks (seal, flanges)Monthly
Clean strainer if fittedMonthly or as needed
Lubricate bearings (if grease‑fitted)Every 6 months
Replace mechanical seal8,000 – 12,000 hours or when leaking
Check motor current and vibrationQuarterly
Inspect impeller and wear rings20,000 hours or 3 years

Troubleshooting

ProblemLikely CauseSolution
Pump delivers no waterNot primed, suction valve closed, impeller blockedPrime; open valve; clean impeller
Low flow / pressureWorn wear rings or impeller, air in suction, discharge valve partially closedReplace wear rings; vent air; open valve
Pump runs but shuts off after short timeThermal overload, low water level, voltage dipClean motor vents; check water source; check voltage
Excessive noise / vibrationCavitation, misalignment, worn bearingsIncrease NPSHa; re‑align; replace bearings
Seal leakingWorn faces, dry running, wrong elastomerReplace seal; ensure prime; verify seal material

Why Choose Our Water Pump

  • Complete range – End suction, self‑priming, multistage, submersible – one source for all clean water pumping needs.

  • High efficiency – Optimised hydraulics, IE3/IE4 motors reduce operating costs.

  • Durable construction – Cast iron, stainless steel, or engineered plastic for long life.

  • Easy maintenance – Back pull‑out design, cartridge seals, widely available spare parts.

  • Compliance – CE, ISO 9906 performance, ATEX (on request), potable water certifications (WRAS, NSF).

  • Global voltage – 110V, 230V, 400V, 460V, 690V, 50Hz or 60Hz.

  • Quick delivery – Stocks of popular models for rapid shipment.

  • Factory support – Engineering assistance, warranty, spare parts worldwide.

Recommended Spare Parts (Per Pump)

ComponentRecommended Quantity
Mechanical seal kit1 set
Impeller (for critical pumps)1
Bearing set1 set
Gasket / O‑ring kit1 set

Get a Quote or Engineering Support

For detailed selection of the correct water pump for your application – including flow/head requirements, fluid properties, installation type, material, and power supply – please contact our engineering team.

Email: info@hyrig.com

Our engineers support residential, agricultural, commercial, and industrial water projects worldwide with reliable, efficient water pumps – built for long service and easy maintenance.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit