| Model | Input Signal | Control Mode | Matched Instrument |
|---|---|---|---|
| XMY-20 | 0-10mA | None | YSG-2 |
| XMY-30 | 4-20mA | 2 positional control | YSG-3 |
| XMY-32 | 4-20mA | 2 positional control | YSG-03 |
Data source: Technical data table
The XMY-30 processes the 4-20mA signal and compares it to user-set alarm points. When the pressure exceeds or falls below the set limits, the built-in relays trigger the 2 positional control outputs for automated control.
Replacing an old controller? Check:
Need a controller for a micro-pressure transmitter? View the XMY-32 Digital Pressure Controller. Explore the full Pressure Transmitters & Digital Instruments series.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: Does it have a 24V DC output to power the transmitter?
A: The standard XMY-30 may not provide 24V loop power. Please confirm with our engineers if you need a loop-powered model.
Q: What is the typical lead time?
A: Standard configurations typically have a 2-3 week lead time.
For XMY-30 digital pressure controller selection, contact HYRIG: info@hyrig.com HYRIG is an industrial instrumentation supplier providing pressure gauges, transmitters, and related spare parts to process, oil & gas, and manufacturing operators worldwide.
Page last updated: 2026-10-27
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.