| Model | Power Supply | Output Signal | Load Resistance |
|---|---|---|---|
| YSG-2 | AC 220V | 0-10mA | < 1k Ω |
| YSG-3 | DC 24V | 4-20mA | < 250 Ω |
| YSG-03 | DC 24V | 4-20mA | < 250 Ω (Micro-pressure) |
Data source: Technical data table
The YSG-3 uses a Bourdon tube connected to an inductance coil. As pressure changes, the Bourdon tube moves a magnetic core inside the coil, changing the inductance. The built-in electronic circuit converts this change into a standard 4-20mA signal, which can be transmitted over long distances without signal loss.
Upgrading to a 4-20mA system? Check:
Need the matching digital display or controller? View the XMY-30 Digital Pressure Controller. Explore the full Pressure Transmitters & Digital Instruments series.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: What is the typical lead time?
A: Standard configurations typically have a 3-4 week lead time.
Q: Is it explosion-proof?
A: The standard YSG-3 is not explosion-proof. For hazardous areas, please refer to our YX-160-B Explosion-proof Contact Gauge.
For YSG-3 inductance pressure transmitter selection, contact HYRIG: info@hyrig.com HYRIG is an industrial instrumentation supplier providing pressure gauges, transmitters, and related spare parts to process, oil & gas, and manufacturing operators worldwide.
Page last updated: 2026-10-27
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.