| Model | Type | Dial Size | Output Signal | Matched Instrument |
|---|---|---|---|---|
| YTZ-150 | Transducer Gauge | 150 mm | 3-400 Ω | XMY-10 |
| YSG-3 | Transmitter | 150 mm | 4-20mA | XMY-30 |
| YSH-3 | Transmitter | 150 mm | 0-20mV | XMY-40 |
Data source: Technical data table
The YTZ-150 uses a Bourdon tube to measure pressure. A sliding contact (potentiometer) is attached to the movement. As the pressure changes, the pointer moves, changing the resistance value in the circuit. This resistance signal is sent to a secondary instrument (like the XMY-10) for remote display.
Replacing an old transducer gauge? Check:
Need the matching digital display? View the XMY-10 Digital Pressure Indicator. Explore the full Pressure Transmitters & Digital Instruments series.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: What is the typical lead time?
A: Standard configurations typically have a 3-4 week lead time.
Q: Can I use a third-party digital display?
A: Yes, as long as it is compatible with a 3-400 Ω resistance input. However, we recommend using our XMY series for guaranteed compatibility.
For YTZ-150 resistance transducer gauge selection, contact HYRIG: info@hyrig.com HYRIG is an industrial instrumentation supplier providing pressure gauges, transmitters, and related spare parts to process, oil & gas, and manufacturing operators worldwide.
Page last updated: 2026-10-27
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.