| Model | Output Signal | Power Supply | Application |
|---|---|---|---|
| YSH-3 | 0-20mV | AC 220V | Standard pressure |
| YSH-1 | 0-20mV | AC 220V | Micro-pressure |
| YSG-3 | 4-20mA | DC 24V | Standard pressure |
Data source: Technical data table
The YSH-3 uses a Bourdon tube connected to a Hall effect sensor. As pressure changes, the Bourdon tube moves a small magnet. The Hall sensor detects the changing magnetic field and outputs a proportional voltage signal (0-20mV). It is simple, compact, and consumes very little power.
Replacing an old Hall effect transmitter? Check:
Need the matching digital display? Contact our team for the XMY-40 Digital Pressure Indicator. Explore the full Pressure Transmitters & Digital Instruments series.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: Why does it need AC 220V power if the output is only mV?
A: The internal Hall sensor and circuitry require AC 220V to operate, but the signal sent to the receiving instrument is a low-voltage 0-20mV DC signal.
Q: What is the typical lead time?
A: Standard configurations typically have a 3-4 week lead time.
For YSH-3 Hall effect pressure transmitter selection, contact HYRIG: info@hyrig.com HYRIG is an industrial instrumentation supplier providing pressure gauges, transmitters, and related spare parts to process, oil & gas, and manufacturing operators worldwide.
Page last updated: 2026-10-27
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.