| Model | Mounting Style | Dial Size | Connection | Application Scenario |
|---|---|---|---|---|
| Y-100 | Lower Mount (Bottom) | 100 mm | 1/4" or 1/2" NPT | Pipeline, general equipment |
| Y-100Z | Center Back Mount | 100 mm | 1/4" or 1/2" NPT | Bracket mounting |
| Y-100ZT | Panel Mount (Flange) | 100 mm | 1/4" or 1/2" NPT | Control panels, consoles |
Data source: Technical data table
The Y-100ZT features a steel case with a front flange ring. The pressure enters through the center back connection and drives the Bourdon tube. This design allows the dial to be flush-mounted through a hole in a panel, securing it tightly with three screws. It provides a clean look for operator panels and protects the gauge body behind the panel.
Replacing an old panel-mounted gauge? Here is what to check:
Not sure whether you need a center back mount or a panel mount? Tell us your system requirements, and our engineers will provide the correct model code. Explore our complete Y Series General Pressure Gauges for other mounting options like the standard Y-100 Lower Mount.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: What is the difference between Y-100Z and Y-100ZT?
A: The "Z" refers to a center back connection, often used with a U-bracket. The "ZT" adds a front flange, designed to be inserted through a panel cutout.
Q: Does it come with the mounting screws?
A: The standard packaging includes the gauge and the front flange. Please confirm with our team if you require specific mounting hardware.
For Y-100ZT panel mount pressure gauge selection and technical support, contact HYRIG: info@hyrig.com HYRIG is an industrial instrumentation supplier providing pressure gauges, transmitters, and related spare parts to process, oil & gas, and manufacturing operators worldwide.
Page last updated: 2026-10-27
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.