| Sub-Category | Typical Models | Primary Features |
|---|---|---|
| Precision Pressure Gauges | YB-150, YB-201 | High accuracy (0.25%), mirror dial, zero adjustment |
| Dead Weight Testers | YU-60A, YU-600 | Pressure primary standard, high accuracy (0.05%) |
| Pressure Calibrators | YJY-60, YJY-600 | Hand-lift pump, calibrates general gauges |
Data source: Technical data table
Precision gauges use high-quality Bourdon tubes with mirror dials to eliminate parallax errors. Dead weight testers use a piston-cylinder system where weights are placed on a piston to generate precise pressure. Calibrators use a hand-lift pump to apply pressure to both a master gauge and the gauge under test.
Need help choosing the right accuracy class or pressure range for your lab? Tell us your calibration requirements, and our engineers will provide the correct model code.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: What is the difference between a precision gauge and a general gauge?
A: Precision gauges offer higher accuracy (e.g., 0.25% or 0.4%) and often feature a mirror dial for parallax reduction, while general gauges are typically 1.5% to 2.5% accuracy.
Q: Do you provide calibration certificates?
A: Standard products come with a factory test report. Please contact us if you require a third-party calibration certificate.
For precision pressure gauge and tester selection, contact HYRIG: info@hyrig.com HYRIG is an industrial instrumentation supplier providing pressure gauges, transmitters, and related spare parts to process, oil & gas, and manufacturing operators worldwide.
Page last updated: 2026-10-27
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.