| Model | Range | Type | Medium | Application |
|---|---|---|---|---|
| YJY-60 | 0-6 MPa | Calibrator | Transformer oil | Gauge calibration |
| YJY-600 | 0-60 MPa | Calibrator | 20# oil | High-pressure calibration |
| YU-60A | 0-6 MPa | Dead Weight Tester | Transformer oil | Primary standard |
Data source: Technical data table
The YJY-60 consists of a hand-lift pump and a pressure manifold. You connect a master gauge and the gauge under test. By pumping the handle, pressure is generated and transmitted through the transformer oil, allowing you to compare the readings on both gauges.
Replacing an old calibrator? Check:
Need a primary standard instead of a hand pump? View the YU-60A Dead Weight Tester. Explore the full Precision Pressure Gauges series.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: Does this come with a master gauge?
A: The standard YJY-60 is a pump/calibrator only. You can mount your own master gauge. Please contact us if you need a complete set with a standard gauge.
Q: What is the typical lead time?
A: Standard configurations typically have a 3-4 week lead time.
For YJY-60 pressure calibrator selection, contact HYRIG: info@hyrig.com HYRIG is an industrial instrumentation supplier providing pressure gauges, transmitters, and related spare parts to process, oil & gas, and manufacturing operators worldwide.
Page last updated: 2026-10-27
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.