| Model | Range | Medium | Pump Type | Accuracy |
|---|---|---|---|---|
| YU-60A | 0-6 MPa | Transformer oil | Hand-lift | 0.05 |
| YU-600 | 0-60 MPa | 20# oil | Hand-lift | 0.05 |
| YJY-60 | 0-6 MPa | Transformer oil | Hand-lift | N/A |
Data source: Technical data table
The YU-60A uses a piston-cylinder system. Weights are placed on the top of a piston, which floats on a film of transformer oil. The hand-lift pump generates the initial pressure. When the pressure from the system balances the weight on the piston, the pressure is accurately known. This is a primary standard method for pressure calibration.
Replacing an old pressure standard? Check:
Need a higher pressure range for your calibration lab? View the YU-600 Dead Weight Tester. Explore the full Precision Pressure Gauges series.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Q: What weights are included?
A: The standard set includes weights for 0.05 MPa (4 pcs), 0.01 MPa (4 pcs), and 0.005 MPa (2 pcs).
Q: What is the typical lead time?
A: Due to the precision machining and calibration required, lead time is typically 6-8 weeks.
For YU-60A dead weight tester selection, contact HYRIG: info@hyrig.com HYRIG is an industrial instrumentation supplier providing pressure gauges, transmitters, and related spare parts to process, oil & gas, and manufacturing operators worldwide.
Page last updated: 2026-10-27
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.