| Model | Type | Dial Size | Accuracy | Measuring Range (kPa) |
|---|---|---|---|---|
| YE-75 | Capsule | 75 mm | 1.5 | 0-4 to 0-40 |
| YE-100 | Capsule | 100 mm | 1.5 | 0-4 to 0-40 |
| YE-150 | Capsule | 150 mm | 1.5 | 0-4 to 0-40 |
Data source: Technical data table
The YE-100 uses a capsule (a sealed, corrugated chamber made of tin phosphor bronze) as its pressure-sensing element. When the pressure or vacuum changes, the capsule expands or contracts. This movement is transmitted through a linkage to the pointer, providing a highly accurate reading for very low pressures. It is ideal for applications where standard Bourdon tubes are not sensitive enough.
Replacing an old capsule gauge? Here is what to check:
Not sure about the exact micro-pressure range? Tell us your system requirements, and our engineers will provide the correct model code. Explore our complete Diaphragm & Capsule Pressure Gauges series.
Disclaimer: This equipment is designed for extreme temperature or corrosive environments. Verify material compatibility and temperature ratings with HYRIG engineers prior to installation.
Q: Can this gauge measure negative pressure?
A: Yes, the YE-100 is available in vacuum ranges (e.g., -4 to 0 kPa) and compound ranges (e.g., -2 to 2 kPa).
Q: What is the typical lead time?
A: Standard configurations typically have a 2-3 week lead time.
For YE-100 capsule pressure gauge selection and technical support, contact HYRIG: info@hyrig.com HYRIG is an industrial instrumentation supplier providing pressure gauges, transmitters, and related spare parts to process, oil & gas, and manufacturing operators worldwide.
Page last updated: 2026-10-27
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.