| Model | Type | Dial Size | Wetted Parts Material | Connection |
|---|---|---|---|---|
| YPF-100A | Diaphragm | 100 mm | PH15-7Mo / 1Cr18Ni9Ti | M20 × 1.5 |
| YP-100BF | Diaphragm (Flange) | 100 mm | 316 SS | Flange |
| YE-100 | Capsule | 100 mm | Tin phosphor bronze | M20 × 1.5 |
Data source: Technical data table
The YPF-100A uses a PH15-7Mo stainless steel diaphragm to separate the corrosive measuring medium from the gauge's internal movement. When pressure is applied, the diaphragm deflects, transferring the force through a linkage to the movement parts. This design prevents the media from clogging or corroding the internal brass and steel components, ensuring a long service life in chemical plants.
Replacing an old diaphragm gauge? Here is what to check:
Not sure if the YPF-100A is the right fit, or do you need a 316L SS flanged version? Tell us your system requirements, and our engineers will provide the correct model code. Explore our complete Diaphragm & Capsule Pressure Gauges series.
Disclaimer: This equipment is designed for extreme temperature or corrosive environments. Verify material compatibility and temperature ratings with HYRIG engineers prior to installation.
Q: What is the maximum pressure this gauge can handle?
A: The standard YPF-100A can handle up to 2.5 MPa (25 bar). For higher pressures, please contact our team for alternative diaphragm seal configurations.
Q: What is the typical lead time?
A: Standard configurations typically have a 3-4 week lead time.
For YPF-100A diaphragm pressure gauge selection and technical support, contact HYRIG: info@hyrig.com HYRIG is an industrial instrumentation supplier providing pressure gauges, transmitters, and related spare parts to process, oil & gas, and manufacturing operators worldwide.
Page last updated: 2026-10-27
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.