YUKEN CPDG-06-E-50-50 Pilot Control Valve
Overview:
HYRIG can supply the YUKEN CPDG-06-E-50-50 and related hydraulic components. This subplate-mounted valve provides dual-pilot control for both directions, suitable for double-acting actuators requiring controlled positioning.
CPDG indicates dual-pilot control (double-acting). 50 specifies a 5.0 MPa minimum pilot pressure required to open the check valve. This configuration allows controlled flow in both directions, suitable for double-acting cylinders requiring precise positioning.
Confirm the dual-pilot (CPDG) control type and 50 (5.0 MPa) pilot pressure code when replacing. For single-pilot (standard) circuits, the CPG series is required.
Used in YUKEN subplate-mounted systems for NG20 circuits. For related components, view YUKEN Check & Pilot Check Valves.
Need to confirm whether dual-pilot control is required for your double-acting actuator? Contact HYRIG with your circuit details.
Suitable for high-flow hydraulic systems requiring controlled positioning and load-holding in both directions.
Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.
Specifications:
Contact Us:
For YUKEN CPDG-06-E-50-50 selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.