YUKEN CPG-03-E-35-50 Pilot Control Valve
Overview:
HYRIG can supply the YUKEN CPG-03-E-35-50 and related hydraulic components. This subplate-mounted valve integrates a check valve with pilot-controlled reverse opening for load-holding and controlled lowering.
CPG indicates single-pilot control (standard). 35 specifies a 3.5 MPa minimum pilot pressure required to open the check valve. The valve allows free flow in one direction and pilot-controlled reverse flow for controlled lowering.
Confirm the single-pilot (CPG) control type and 35 (3.5 MPa) pilot pressure code when replacing. For dual-pilot (double-acting) circuits, the CPDG series is required.
Used in YUKEN subplate-mounted systems. For related components, view YUKEN Check & Pilot Check Valves.
Need to confirm the pilot pressure requirement for your circuit? Contact HYRIG with your system parameters.
Suitable for load-holding and controlled lowering in medium-flow hydraulic systems with subplate mounting.
Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.
Specifications:
Contact Us:
For YUKEN CPG-03-E-35-50 selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.