YUKEN MPW-03-2-40 Pilot Check Valve (Hydraulic Lock)
Overview:
HYRIG can supply the YUKEN MPW-03-2-40 and related hydraulic components. The MPW-03-2-40 is a dual-line pilot-operated check valve used for load-holding in both A and B circuits.
The MPW-03-2-40 blocks flow in both A and B lines until pilot pressure is applied to release the check valves. The 0.2 MPa cracking pressure is the standard low-pressure option (0.2/0.4 MPa available).
Confirm the dual A&B (MPW) configuration and 2 (0.2 MPa) cracking pressure when replacing. Single-line versions (MPA for A-line, MPB for B-line) are available for circuits that do not require dual locking.
Used in YUKEN modular valve stacks. For related components, view YUKEN Check & Pilot Check Valves.
Need to confirm whether dual (MPW) or single (MPA/MPB) locking is required? Contact HYRIG with your circuit details.
Used for load-holding in both A and B lines, common in clamping, mold-locking, and lifting circuits.
Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.
Specifications:
Contact Us:
For YUKEN MPW-03-2-40 selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.