YUKEN MCP-01-2-30 Check Valve
Overview:
HYRIG can supply the YUKEN MCP-01-2-30 and related hydraulic components. The MCP-01-2-30 is a sandwich-mounted check valve that allows free flow in one direction and blocks flow in the reverse direction in the P-line.
The MCP-01-2-30 blocks flow in the P-line in one direction and allows free flow in the opposite direction. The 0.2 MPa cracking pressure is the standard mid-range option (0.035/0.2/0.4 MPa available).
Verify the controlled line (P) and cracking pressure code (2 = 0.2 MPa) when replacing. The 30 series has unchanged installation dimensions.
Used in YUKEN modular valve stacks. For related components, view YUKEN Check & Pilot Check Valves.
Need to confirm the channel or cracking pressure for your circuit? Contact HYRIG with your requirements.
Suitable for hydraulic systems requiring P-line isolation with a moderate cracking pressure.
Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.
Specifications:
Contact Us:
For YUKEN MCP-01-2-30 selection, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.