YUKEN CPG/CPDG Pilot Control Valve Series | Subplate, NG10–NG32

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the YUKEN CPG and CPDG series. These are subplate-mounted pilot control check valves, available in standard (CPG, single pilot) and dual-pilot (CPDG) configurations.
Conatct For Details
DetailReview(0)Additional

YUKEN CPG/CPDG Pilot Control Valve Series

Overview:

HYRIG can supply the YUKEN CPG and CPDG series and related hydraulic components. These subplate-mounted pilot control valves integrate a check valve with pilot-controlled reverse opening for precise load-holding and positioning.

Key Specifications & Model Comparison

Model CodeSizeControl TypePilot PressureMax Flow
CPG-03-E-35-50NG10Standard (single)3.5 MPa40 L/min
CPG-03-E-04-50NG10Standard (single)0.4 MPa40 L/min
CPDG-06-E-50-50NG20Dual-pilot5.0 MPa100 L/min
CPDG-03-E-20-50NG10Dual-pilot2.0 MPa40 L/min
CPG-06-E-35-50NG20Standard (single)3.5 MPa100 L/min

Data source: YUKEN catalog and distributor listings.

For the NG10 standard-type configuration, view YUKEN CPG-03-E-35-50. For the NG20 dual-pilot configuration, view YUKEN CPDG-06-E-50-50.

Dimensions (Text-Based)

Parameter03 (NG10)06 (NG20)10 (NG32)
Mounting StandardISO 5781ISO 5781ISO 5781
ConnectionSubplateSubplateSubplate

Cross-Reference & Replacement

CPG = single pilot control (standard); CPDG = dual pilot control (double-acting). The pilot pressure code (04/20/35/50 = 0.4/2.0/3.5/5.0 MPa) determines the minimum pressure required to open the check valve. All code positions must match when replacing.

Selection Support

Need to confirm whether single (CPG) or dual (CPDG) pilot control is required? Contact HYRIG with your circuit schematic, and we will recommend the correct model.

Applications

Used for load-holding and controlled lowering in high-flow hydraulic systems, particularly where subplate mounting and precise pilot control are required.

Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.

Specifications:

  • Valve Type: Subplate pilot control check valve
  • Sizes: 03 (NG10), 06 (NG20), 10 (NG32)
  • Control Types: CPG = standard (single pilot); CPDG = dual-pilot (double-acting)
  • Pilot Pressure Codes: 04 = 0.4 MPa, 20 = 2.0 MPa, 35 = 3.5 MPa, 50 = 5.0 MPa
  • Maximum Operating Pressure: 31.5 MPa
  • Rated Flow: 03 size: 40 L/min; 06 size: 100 L/min; 10 size: contact factory for confirmation

Contact Us:

For YUKEN CPG/CPDG series selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit