YUKEN MPA/MPB/MPW Pilot Check Valve Series | Hydraulic Lock

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the YUKEN MPA, MPB, and MPW series. These are pilot-operated check valves (hydraulic locks) in sandwich plate design, used for load-holding and leakage-free blocking in A, B, or both lines.
Conatct For Details
DetailReview(0)Additional

YUKEN MPA/MPB/MPW Pilot Check Valve Series (Hydraulic Lock)

Overview:

HYRIG can supply the YUKEN MPA, MPB, and MPW series and related hydraulic components. These sandwich-mounted pilot-operated check valves allow free flow in one direction and blocked flow in reverse, which can be released by pilot pressure.

Key Specifications & Model Comparison

Model CodeSizeControlled LinesCracking PressureMax Flow
MPW-03-2-40NG10A & B0.2 MPa70 L/min
MPW-01-2-40NG6A & B0.2 MPa30 L/min
MPA-03-2-40NG10A0.2 MPa70 L/min
MPB-03-2-40NG10B0.2 MPa70 L/min
MPW-06-2-10NG20A & B0.2 MPa200 L/min

Data source: YUKEN catalog and distributor listings.

For the NG10 A&B dual-line configuration, view YUKEN MPW-03-2-40.

Note: MPA/MPB/MPW are for load-holding only. For smooth control of vertical loads, consider a counterbalance valve (MHA/MHB).

Dimensions (Text-Based)

Parameter01 (NG6)03 (NG10)06 (NG20)
Mounting StandardISO 4401-03ISO 4401-05ISO 4401-06
Mounting Bolt Pattern4 × M54 × M64 × M8
Approx. Weight1.1 kg2.0 kg4.5 kg

Cross-Reference & Replacement

MPA = A-line lock, MPB = B-line lock, MPW = dual A&B lock. The cracking pressure code (2/4 = 0.2/0.4 MPa) must match the original circuit. The 40 series (01/03 size) and 10 series (06 size) have unchanged installation dimensions.

Selection Support

Need to confirm whether single (MPA/MPB) or dual (MPW) locking is required? Contact HYRIG with your circuit details, and we will recommend the correct configuration.

Applications

Used for load-holding and pilot-line isolation in hydraulic systems, particularly where a pilot signal is available to release the check valve. Common in clamping, mold-locking, and lifting circuits.

Disclaimer: YUKEN is a registered trademark of YUKEN KOGYO CO., LTD. HYRIG is an independent supplier of hydraulic components and is not affiliated with YUKEN KOGYO CO., LTD.

Specifications:

  • Valve Type: Pilot-operated check valve (hydraulic lock, sandwich plate)
  • Sizes: 01 (NG6), 03 (NG10), 06 (NG20)
  • Configurations: MPA = A-line; MPB = B-line; MPW = A&B lines (most common)
  • Cracking Pressure Codes: 2 = 0.2 MPa, 4 = 0.4 MPa
  • Maximum Operating Pressure: 25 MPa (01/03 size); 31.5 MPa (06 size)
  • Maximum Flow: 01 size: 30 L/min; 03 size: 70 L/min; 06 size: 200 L/min

Contact Us:

For YUKEN MPA/MPB/MPW series selection, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit